The Kubota STV40 has a 3-point hitch lift capacity of 1,540 lb (699 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 10.6 gpm (40.1 L/min), and operating weight 2,502 lb (1,135 kg).
Best rear lift figure1,540 lb (699 kg)
Lift at 24 inches1,540 lb (699 kg)
Hitch categoryCategory 1
Operating weight2,502 lb (1,135 kg)
Kubota STV40 3-Point Hitch Lift Capacity
3-point hitch lift capacity
2,800 lb (1,270 kg)
Lift capacity at 24 inches behind link ends
1,540 lb (699 kg)
Hitch category
Category 1
Hydraulic pump flow
10.6 gpm (40.1 L/min)
Operating weight
2,502 lb (1,135 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,540 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,540 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
10.6 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
2,502 lb
Average
2,600 lb
Low
1,500 lb
High
4,500 lb
Kubota STV40 Hitch and Rear Lift Notes
Rear lift capacity note
The key hitch number for the Kubota STV40 is 1,540 lb (699 kg) (lift at 24 inches behind the link ends). In plain terms, it is useful for compact implements like box blades, small tillers, rotary cutters, ballast boxes and rear blades
24-inch lift note
For the Kubota STV40, the 1,540 lb (699 kg) 24-inch lift spec is the one to use when comparing tillers, blades, mowers, seeders and ballast boxes
Hydraulic flow note
The Kubota STV40’s captured hydraulic pump flow is 10.6 gpm (40.1 L/min). Lift capacity is still the main hitch number, but pump flow helps describe hydraulic capability
Operating weight note
The Kubota STV40 operating weight is listed as 2,502 lb (1,135 kg). Tractor weight matters because a machine can sometimes lift more than it should comfortably carry on rough ground
Rear implement matching
Do not buy rear implements by model number alone. Match the Kubota STV40’s lift capacity against gear like box blade, small rotary cutter, tiller, ballast box, and rear blade
Kubota STV40 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota STV40?
Rear lift capacity for the Kubota STV40 is shown as 1,540 lb (699 kg) for lift at 24 inches behind the link ends. For real attachment matching, stay conservative with heavy attachments and allow margin for implement overhang.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota STV40 is listed at 1,540 lb (699 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota STV40?
Yes. The Kubota STV40 is listed as Category 1, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota STV40?
Start with 1,540 lb (699 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include box blade, small rotary cutter, tiller, ballast box, and rear blade.
Do hydraulic flow and weight matter for the Kubota STV40?
Yes. The Kubota STV40 lists hydraulic pump flow of 10.6 gpm (40.1 L/min) and operating weight of 2,502 lb (1,135 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
