The Kubota STA-30 has a 3-point hitch lift capacity of 1,200 lb (544 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 8.2 gpm (31 L/min), and operating weight 2,475 lb (1,123 kg).
Best rear lift figure1,200 lb (544 kg)
Lift at 24 inches1,200 lb (544 kg)
Hitch categoryCategory 1
Operating weight2,475 lb (1,123 kg)
Kubota STA-30 3-Point Hitch Lift Capacity
Lift capacity at 24 inches behind link ends
1,200 lb (544 kg)
Hitch category
Category 1
Hydraulic pump flow
8.2 gpm (31 L/min)
Operating weight
2,475 lb (1,123 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,200 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,200 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
8.2 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
2,475 lb
Average
2,600 lb
Low
1,500 lb
High
4,500 lb
Kubota STA-30 Hitch and Rear Lift Notes
24-inch lift note
The Kubota STA-30’s 1,200 lb (544 kg) lift rating at 24 inches behind the link ends is the better real-world number for mounted implements than a bare hitch-end rating
Hitch category note
Hitch category on the Kubota STA-30 is Category 1. That is one of the first checks before buying a rear blade, tiller, mower or ballast box
Hydraulic flow note
Hydraulic pump flow is listed as 8.2 gpm (31 L/min). That is useful context for hydraulic response and some rear or auxiliary hydraulic functions
Operating weight note
For the Kubota STA-30, operating weight is 2,475 lb (1,123 kg). Use that beside rear lift capacity before hanging a heavy implement out the back
Rear implement matching
For the Kubota STA-30, compare 1,200 lb (544 kg) with real implement weight. Common rear-implement checks include box blade, small rotary cutter, tiller, ballast box, and rear blade
Kubota STA-30 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota STA-30?
Rear lift capacity for the Kubota STA-30 is shown as 1,200 lb (544 kg) for lift at 24 inches behind the link ends. For real attachment matching, stay conservative with heavy attachments and allow margin for implement overhang.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota STA-30 is listed at 1,200 lb (544 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota STA-30?
Yes. The Kubota STA-30 is listed as Category 1, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota STA-30?
Start with 1,200 lb (544 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include box blade, small rotary cutter, tiller, ballast box, and rear blade.
Is lift capacity enough to size implements for the Kubota STA-30?
No. The Kubota STA-30 may list 1,200 lb (544 kg) of rear lift, but the 2,475 lb (1,123 kg) operating weight and 8.2 gpm (31 L/min) hydraulic flow also matter for real work.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
