The Kubota M8200 has a 3-point hitch lift capacity of 3,307 lb (1,500 kg) at 24 inches behind the link ends. It also lists hydraulic pump flow 17.1 gpm (64.7 L/min) and operating weight 6,615 lb (3,001 kg).
Best rear lift figure3,307 lb (1,500 kg)
Lift at 24 inches3,307 lb (1,500 kg)
Operating weight6,615 lb (3,001 kg)
Kubota M8200 3-Point Hitch Lift Capacity
3-point hitch lift capacity
2,800 lb (1,270 kg)
Lift capacity at 24 inches behind link ends
3,307 lb (1,500 kg)
Hydraulic pump flow
17.1 gpm (64.7 L/min)
Operating weight
6,615 lb (3,001 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
3,307 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
3,307 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
17.1 gpm
Average
15 gpm
Low
8 gpm
High
25 gpm
Operating weight comparison
This model
6,615 lb
Average
5,500 lb
Low
3,000 lb
High
9,000 lb
Kubota M8200 Hitch and Rear Lift Notes
Rear lift capacity note
The Kubota M8200 rear hitch spec points to 3,307 lb (1,500 kg) for lift at 24 inches behind the link ends. Use that number before assuming a heavy rear implement will lift safely
24-inch lift note
Use the 24-inch number first. It is usually closer to how a real implement loads the 3-point hitch
Hydraulic flow note
The 17.1 gpm (64.7 L/min) hydraulic flow figure helps round out the Kubota M8200’s rear-implement picture, especially where hydraulic attachments or remotes are involved
Operating weight note
The 6,615 lb (3,001 kg) operating weight gives context for the Kubota M8200’s hitch lift capacity. Rear ballast and tire setup can still change the real-world feel
Rear implement matching
The practical reason to check rear lift on the Kubota M8200 is implement fit. Think rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box, then compare actual implement weight
Kubota M8200 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota M8200?
Rear lift capacity for the Kubota M8200 is shown as 3,307 lb (1,500 kg) for lift at 24 inches behind the link ends. For real attachment matching, match implements carefully, especially if the attachment is long or carries weight far behind the hitch.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota M8200 is listed at 3,307 lb (1,500 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
What hitch category is the Kubota M8200?
This row does not show a clean hitch category for the Kubota M8200. Check the operator manual or official spec sheet before buying implements, because lift capacity alone does not guarantee fit.
How should I match rear implements to the Kubota M8200?
Start with 3,307 lb (1,500 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box.
Do hydraulic flow and weight matter for the Kubota M8200?
Yes. The Kubota M8200 lists hydraulic pump flow of 17.1 gpm (64.7 L/min) and operating weight of 6,615 lb (3,001 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
