The Kubota M6950 has a 3-point hitch lift capacity of 2,980 lb (1,352 kg) at 24 inches behind the link ends. It also lists hitch category Category 1 / Category 2 and hydraulic pump flow 14.7 gpm (55.6 L/min).
Best rear lift figure2,980 lb (1,352 kg)
Lift at 24 inches2,980 lb (1,352 kg)
Hitch categoryCategory 1 / Category 2
Kubota M6950 3-Point Hitch Lift Capacity
Lift capacity at 24 inches behind link ends
2,980 lb (1,352 kg)
Hitch category
Category 1 / Category 2
Hitch control type
position control
Hydraulic pump flow
14.7 gpm (55.6 L/min)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
2,980 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
2,980 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
14.7 gpm
Average
15 gpm
Low
8 gpm
High
25 gpm
Kubota M6950 Hitch and Rear Lift Notes
Rear lift capacity note
The Kubota M6950 rear hitch spec points to 2,980 lb (1,352 kg) for lift at 24 inches behind the link ends. Use that number before assuming a heavy rear implement will lift safely
24-inch lift note
Use the 24-inch number first. It is usually closer to how a real implement loads the 3-point hitch
Hitch category note
If you are matching implements to the Kubota M6950, start with Category 1 / Category 2, then check lift capacity and tractor stability
Hydraulic flow note
The Kubota M6950’s captured hydraulic pump flow is 14.7 gpm (55.6 L/min). Lift capacity is still the main hitch number, but pump flow helps describe hydraulic capability
Rear implement matching
The practical reason to check rear lift on the Kubota M6950 is implement fit. Think rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box, then compare actual implement weight
Kubota M6950 3-Point Hitch FAQ
What is the Kubota M6950 3-point hitch lift capacity?
The Kubota M6950 is listed with 2,980 lb (1,352 kg) for lift at 24 inches behind the link ends. That makes it a utility rear-lift tractor, so it is suited to common property and farm implements, heavier blades, mowers, seeders and general rear attachments.
What does the Kubota M6950 24-inch lift capacity mean?
It means the Kubota M6950 is rated to lift 2,980 lb (1,352 kg) with the load measured 24 inches behind the link ends. That is usually closer to real implement use than a hitch-end-only number.
Can the Kubota M6950 use any rear implement?
No. Start with the Category 1 / Category 2 hitch category, then check implement weight against the 2,980 lb (1,352 kg) rating at 24 inches behind the link ends.
What rear implements can the Kubota M6950 lift?
Use the 2,980 lb (1,352 kg) rating at 24 inches behind the link ends as the first filter for implements such as rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box. Also check hitch category Category 1 / Category 2 before choosing the implement.
Does hydraulic pump flow matter for the Kubota M6950?
Yes, but it is not the same as lift capacity. The Kubota M6950 is listed at 14.7 gpm (55.6 L/min) hydraulic pump flow, while the rear lift number tells you what the hitch can raise.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
