The Kubota M1-75 has a 3-point hitch lift capacity of 3,200 lb (1,451 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 12.5 gpm (47.3 L/min), and operating weight 6,504 lb (2,950 kg).
Best rear lift figure3,200 lb (1,451 kg)
Lift at 24 inches3,200 lb (1,451 kg)
Hitch categoryCategory 1
Operating weight6,504 lb (2,950 kg)
Kubota M1-75 3-Point Hitch Lift Capacity
3-point hitch lift capacity
2,200 lb (998 kg)
Lift capacity at 24 inches behind link ends
3,200 lb (1,451 kg)
Hitch category
Category 1
Hydraulic pump flow
12.5 gpm (47.3 L/min)
Operating weight
6,504 lb (2,950 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
3,200 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
3,200 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
12.5 gpm
Average
15 gpm
Low
8 gpm
High
25 gpm
Operating weight comparison
This model
6,504 lb
Average
5,500 lb
Low
3,000 lb
High
9,000 lb
Kubota M1-75 Hitch and Rear Lift Notes
Rear lift capacity note
The Kubota M1-75 rear hitch spec points to 3,200 lb (1,451 kg) for lift at 24 inches behind the link ends. Use that number before assuming a heavy rear implement will lift safely
24-inch lift note
Use the 24-inch number first. It is usually closer to how a real implement loads the 3-point hitch
Hitch category note
If you are matching implements to the Kubota M1-75, start with Category 1, then check lift capacity and tractor stability
Hydraulic flow note
The 12.5 gpm (47.3 L/min) hydraulic flow figure helps round out the Kubota M1-75’s rear-implement picture, especially where hydraulic attachments or remotes are involved
Operating weight note
The 6,504 lb (2,950 kg) operating weight gives context for the Kubota M1-75’s hitch lift capacity. Rear ballast and tire setup can still change the real-world feel
Rear implement matching
The practical reason to check rear lift on the Kubota M1-75 is implement fit. Think rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box, then compare actual implement weight
Kubota M1-75 3-Point Hitch FAQ
What is the Kubota M1-75 3-point hitch lift capacity?
The Kubota M1-75 is listed with 3,200 lb (1,451 kg) for lift at 24 inches behind the link ends. That makes it a utility rear-lift tractor, so it is suited to common property and farm implements, heavier blades, mowers, seeders and general rear attachments.
What does the Kubota M1-75 24-inch lift capacity mean?
It means the Kubota M1-75 is rated to lift 3,200 lb (1,451 kg) with the load measured 24 inches behind the link ends. That is usually closer to real implement use than a hitch-end-only number.
Can the Kubota M1-75 use any rear implement?
No. Start with the Category 1 hitch category, then check implement weight against the 3,200 lb (1,451 kg) rating at 24 inches behind the link ends.
What rear implements can the Kubota M1-75 lift?
Use the 3,200 lb (1,451 kg) rating at 24 inches behind the link ends as the first filter for implements such as rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box. Also check hitch category Category 1 and operating weight 6,504 lb (2,950 kg) before choosing the implement.
Do hydraulic flow and weight matter for the Kubota M1-75?
Yes. The Kubota M1-75 lists hydraulic pump flow of 12.5 gpm (47.3 L/min) and operating weight of 6,504 lb (2,950 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
