The Kubota L5240 has a 3-point hitch lift capacity of 2,976 lb (1,350 kg) at 24 inches behind the link ends. It also lists hitch category Category 2 and hydraulic pump flow 9.8 gpm (37.1 L/min).
Best rear lift figure2,976 lb (1,350 kg)
Lift at 24 inches2,976 lb (1,350 kg)
Hitch categoryCategory 2
Kubota L5240 3-Point Hitch Lift Capacity
3-point hitch lift capacity
2,976 lb (1,350 kg)
Lift capacity at 24 inches behind link ends
2,976 lb (1,350 kg)
Hitch category
Category 2
Hitch control type
position control
Hydraulic pump flow
9.8 gpm (37.1 L/min)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
2,976 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
2,976 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
9.8 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Kubota L5240 Hitch and Rear Lift Notes
Rear lift capacity note
The Kubota L5240 rear hitch spec points to 2,976 lb (1,350 kg) for lift at 24 inches behind the link ends. Use that number before assuming a heavy rear implement will lift safely
24-inch lift note
Use the 24-inch number first. It is usually closer to how a real implement loads the 3-point hitch
Hitch category note
If you are matching implements to the Kubota L5240, start with Category 2, then check lift capacity and tractor stability
Hitch control note
The Kubota L5240’s hitch-control field is shown as position control. Use it as a soft reference, not a headline specification
Hydraulic flow note
The 9.8 gpm (37.1 L/min) hydraulic flow figure helps round out the Kubota L5240’s rear-implement picture, especially where hydraulic attachments or remotes are involved
Rear implement matching
The practical reason to check rear lift on the Kubota L5240 is implement fit. Think rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box, then compare actual implement weight
Kubota L5240 3-Point Hitch FAQ
What is the Kubota L5240 3-point hitch lift capacity?
The Kubota L5240 is listed with 2,976 lb (1,350 kg) for lift at 24 inches behind the link ends. That makes it a utility rear-lift tractor, so it is suited to common property and farm implements, heavier blades, mowers, seeders and general rear attachments.
What does the Kubota L5240 24-inch lift capacity mean?
It means the Kubota L5240 is rated to lift 2,976 lb (1,350 kg) with the load measured 24 inches behind the link ends. That is usually closer to real implement use than a hitch-end-only number.
Can the Kubota L5240 use any rear implement?
No. Start with the Category 2 hitch category, then check implement weight against the 2,976 lb (1,350 kg) rating at 24 inches behind the link ends.
What rear implements can the Kubota L5240 lift?
Use the 2,976 lb (1,350 kg) rating at 24 inches behind the link ends as the first filter for implements such as rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box. Also check hitch category Category 2 before choosing the implement.
Does hydraulic pump flow matter for the Kubota L5240?
Yes, but it is not the same as lift capacity. The Kubota L5240 is listed at 9.8 gpm (37.1 L/min) hydraulic pump flow, while the rear lift number tells you what the hitch can raise.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
