The Kubota L405 has a 3-point hitch lift capacity of 1,435 lb (651 kg) at 24 inches behind the link ends. It also lists hitch category Category 1 / Category 2, hydraulic pump flow 8.2 gpm (31 L/min), and operating weight 3,483 lb (1,580 kg).
Best rear lift figure1,435 lb (651 kg)
Lift at 24 inches1,435 lb (651 kg)
Hitch categoryCategory 1 / Category 2
Operating weight3,483 lb (1,580 kg)
Kubota L405 3-Point Hitch Lift Capacity
3-point hitch lift capacity
3,200 lb (1,451 kg)
Lift capacity at 24 inches behind link ends
1,435 lb (651 kg)
Hitch category
Category 1 / Category 2
Hitch control type
position control
Hydraulic pump flow
8.2 gpm (31 L/min)
Operating weight
3,483 lb (1,580 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,435 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,435 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
8.2 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
3,483 lb
Average
2,600 lb
Low
1,500 lb
High
4,500 lb
Kubota L405 Hitch and Rear Lift Notes
Rear lift capacity note
The Kubota L405 rear hitch spec points to 1,435 lb (651 kg) for lift at 24 inches behind the link ends. Use that number before assuming a heavy rear implement will lift safely
24-inch lift note
Use the 24-inch number first. It is usually closer to how a real implement loads the 3-point hitch
Hitch category note
If you are matching implements to the Kubota L405, start with Category 1 / Category 2, then check lift capacity and tractor stability
Hydraulic flow note
The Kubota L405’s captured hydraulic pump flow is 8.2 gpm (31 L/min). Lift capacity is still the main hitch number, but pump flow helps describe hydraulic capability
Operating weight note
The Kubota L405 operating weight is listed as 3,483 lb (1,580 kg). Tractor weight matters because a machine can sometimes lift more than it should comfortably carry on rough ground
Rear implement matching
The practical reason to check rear lift on the Kubota L405 is implement fit. Think box blade, small rotary cutter, tiller, ballast box, and rear blade, then compare actual implement weight
Kubota L405 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota L405?
Rear lift capacity for the Kubota L405 is shown as 1,435 lb (651 kg) for lift at 24 inches behind the link ends. For real attachment matching, stay conservative with heavy attachments and allow margin for implement overhang.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota L405 is listed at 1,435 lb (651 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota L405?
Yes. The Kubota L405 is listed as Category 1 / Category 2, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota L405?
Start with 1,435 lb (651 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include box blade, small rotary cutter, tiller, ballast box, and rear blade.
Do hydraulic flow and weight matter for the Kubota L405?
Yes. The Kubota L405 lists hydraulic pump flow of 8.2 gpm (31 L/min) and operating weight of 3,483 lb (1,580 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
