The Kubota L1-26 has a 3-point hitch lift capacity of 1,100 lb (499 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 8.3 gpm (31.4 L/min), and operating weight 1,800 lb (816 kg).
Best rear lift figure1,100 lb (499 kg)
Lift at 24 inches1,100 lb (499 kg)
Hitch categoryCategory 1
Operating weight1,800 lb (816 kg)
Kubota L1-26 3-Point Hitch Lift Capacity
3-point hitch lift capacity
1,800 lb (816 kg)
Lift capacity at 24 inches behind link ends
1,100 lb (499 kg)
Hitch category
Category 1
Hitch control type
position control
Hydraulic pump flow
8.3 gpm (31.4 L/min)
Operating weight
1,800 lb (816 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,100 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,100 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
8.3 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
1,800 lb
Average
2,600 lb
Low
1,500 lb
High
4,500 lb
Kubota L1-26 Hitch and Rear Lift Notes
Rear lift capacity note
The Kubota L1-26 rear hitch spec points to 1,100 lb (499 kg) for lift at 24 inches behind the link ends. Use that number before assuming a heavy rear implement will lift safely
24-inch lift note
Use the 24-inch number first. It is usually closer to how a real implement loads the 3-point hitch
Hitch category note
If you are matching implements to the Kubota L1-26, start with Category 1, then check lift capacity and tractor stability
Hitch control note
For the Kubota L1-26, position control is listed as hitch-control context. Do not size implements from this field; use lift capacity and hitch category first
Hydraulic flow note
For hydraulic context, the Kubota L1-26 is listed at 8.3 gpm (31.4 L/min). Do not confuse pump flow with lift capacity; they answer different questions
Operating weight note
Weight matters with rear implements. The Kubota L1-26’s captured operating weight is 1,800 lb (816 kg), which affects ballast, traction and stability
Rear implement matching
The practical reason to check rear lift on the Kubota L1-26 is implement fit. Think box blade, small rotary cutter, tiller, ballast box, and rear blade, then compare actual implement weight
Kubota L1-26 3-Point Hitch FAQ
How much can the Kubota L1-26 rear 3-point hitch lift?
The main rear-lift number captured for the Kubota L1-26 is 1,100 lb (499 kg). Use that as the first-pass number for rear implements, not as a front-loader rating.
Why does the 24-inch rear lift spec matter?
The 1,100 lb (499 kg) rating matters because mounted implements put weight behind the lift arms. That extra distance makes the tractor work harder than a close-in hitch-end test.
What hitch category is the Kubota L1-26?
The listed hitch category for the Kubota L1-26 is Category 1. Match implement pins and hitch width to that category before worrying about lift capacity.
Can the Kubota L1-26 handle heavy rear attachments?
The Kubota L1-26’s useful lift reference is 1,100 lb (499 kg). It may suit box blade, small rotary cutter, tiller, ballast box, and rear blade, but stay conservative with heavy attachments and allow margin for implement overhang.
Do hydraulic flow and weight matter for the Kubota L1-26?
Yes. The Kubota L1-26 lists hydraulic pump flow of 8.3 gpm (31.4 L/min) and operating weight of 1,800 lb (816 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
