The Kubota KL4750 has a 3-point hitch lift capacity of 2,800 lb (1,270 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 11.9 gpm (45 L/min), and operating weight 4,012 lb (1,820 kg).
Best rear lift figure2,800 lb (1,270 kg)
Lift at 24 inches2,800 lb (1,270 kg)
Hitch categoryCategory 1
Operating weight4,012 lb (1,820 kg)
Kubota KL4750 3-Point Hitch Lift Capacity
3-point hitch lift capacity
2,200 lb (998 kg)
Lift capacity at 24 inches behind link ends
2,800 lb (1,270 kg)
Hitch category
Category 1
Hydraulic pump flow
11.9 gpm (45 L/min)
Operating weight
4,012 lb (1,820 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
2,800 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Lift at 24 inches comparison
This model
2,800 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
11.9 gpm
Average
15 gpm
Low
8 gpm
High
25 gpm
Operating weight comparison
This model
4,012 lb
Average
5,500 lb
Low
3,000 lb
High
9,000 lb
Kubota KL4750 Hitch and Rear Lift Notes
Rear lift capacity note
The Kubota KL4750 rear hitch spec points to 2,800 lb (1,270 kg) for lift at 24 inches behind the link ends. Use that number before assuming a heavy rear implement will lift safely
24-inch lift note
Use the 24-inch number first. It is usually closer to how a real implement loads the 3-point hitch
Hitch category note
If you are matching implements to the Kubota KL4750, start with Category 1, then check lift capacity and tractor stability
Hydraulic flow note
The 11.9 gpm (45 L/min) hydraulic flow figure helps round out the Kubota KL4750’s rear-implement picture, especially where hydraulic attachments or remotes are involved
Operating weight note
The 4,012 lb (1,820 kg) operating weight gives context for the Kubota KL4750’s hitch lift capacity. Rear ballast and tire setup can still change the real-world feel
Rear implement matching
The practical reason to check rear lift on the Kubota KL4750 is implement fit. Think rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box, then compare actual implement weight
Kubota KL4750 3-Point Hitch FAQ
What is the Kubota KL4750 3-point hitch lift capacity?
The Kubota KL4750 is listed with 2,800 lb (1,270 kg) for lift at 24 inches behind the link ends. That makes it a utility rear-lift tractor, so it is suited to common property and farm implements, heavier blades, mowers, seeders and general rear attachments.
What does the Kubota KL4750 24-inch lift capacity mean?
It means the Kubota KL4750 is rated to lift 2,800 lb (1,270 kg) with the load measured 24 inches behind the link ends. That is usually closer to real implement use than a hitch-end-only number.
Can the Kubota KL4750 use any rear implement?
No. Start with the Category 1 hitch category, then check implement weight against the 2,800 lb (1,270 kg) rating at 24 inches behind the link ends.
What rear implements can the Kubota KL4750 lift?
Use the 2,800 lb (1,270 kg) rating at 24 inches behind the link ends as the first filter for implements such as rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box. Also check hitch category Category 1 and operating weight 4,012 lb (1,820 kg) before choosing the implement.
Do hydraulic flow and weight matter for the Kubota KL4750?
Yes. The Kubota KL4750 lists hydraulic pump flow of 11.9 gpm (45 L/min) and operating weight of 4,012 lb (1,820 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
