The Kubota FT28 has a 3-point hitch lift capacity of 1,200 lb (544 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 8.2 gpm (31 L/min), and operating weight 2,800 lb (1,270 kg).
Best rear lift figure1,200 lb (544 kg)
Lift at 24 inches1,200 lb (544 kg)
Hitch categoryCategory 1
Operating weight2,800 lb (1,270 kg)
Kubota FT28 3-Point Hitch Lift Capacity
Lift capacity at 24 inches behind link ends
1,200 lb (544 kg)
Hitch category
Category 1
Hitch control type
position control
Hydraulic pump flow
8.2 gpm (31 L/min)
Operating weight
2,800 lb (1,270 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,200 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,200 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
8.2 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
2,800 lb
Average
2,600 lb
Low
1,500 lb
High
4,500 lb
Kubota FT28 Hitch and Rear Lift Notes
Rear lift capacity note
For the Kubota FT28, 1,200 lb (544 kg) is the headline rear-lift capacity captured. This matters for ballast boxes, tillers, blades, mowers and other mounted implements
24-inch lift note
The 24-inch lift figure is usually the more useful number because rear implements hang behind the lift arms, not directly on them
Hitch category note
The Kubota FT28 hitch category is listed as Category 1. This matters because rear implements need to match the tractor’s hitch pin size and geometry
Hitch control note
The captured hitch-control data for the Kubota FT28 mentions position control. Treat this as context only and confirm the exact control setup in the operator manual
Hydraulic flow note
Hydraulic pump flow is listed as 8.2 gpm (31 L/min). That is useful context for hydraulic response and some rear or auxiliary hydraulic functions
Operating weight note
For the Kubota FT28, operating weight is 2,800 lb (1,270 kg). Use that beside rear lift capacity before hanging a heavy implement out the back
Rear implement matching
Use the Kubota FT28’s hitch capacity as a filter before shopping for box blade, small rotary cutter, tiller, ballast box, and rear blade
Kubota FT28 3-Point Hitch FAQ
What is the Kubota FT28 3-point hitch lift capacity?
The Kubota FT28 is listed with 1,200 lb (544 kg) for lift at 24 inches behind the link ends. That makes it a compact rear-lift tractor, so it is useful for compact implements like box blades, small tillers, rotary cutters, ballast boxes and rear blades.
What does the Kubota FT28 24-inch lift capacity mean?
It means the Kubota FT28 is rated to lift 1,200 lb (544 kg) with the load measured 24 inches behind the link ends. That is usually closer to real implement use than a hitch-end-only number.
Can the Kubota FT28 use any rear implement?
No. Start with the Category 1 hitch category, then check implement weight against the 1,200 lb (544 kg) rating at 24 inches behind the link ends.
What rear implements can the Kubota FT28 lift?
Use the 1,200 lb (544 kg) rating at 24 inches behind the link ends as the first filter for implements such as box blade, small rotary cutter, tiller, ballast box, and rear blade. Also check hitch category Category 1 and operating weight 2,800 lb (1,270 kg) before choosing the implement.
Is lift capacity enough to size implements for the Kubota FT28?
No. The Kubota FT28 may list 1,200 lb (544 kg) of rear lift, but the 2,800 lb (1,270 kg) operating weight and 8.2 gpm (31 L/min) hydraulic flow also matter for real work.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
