The Kubota B2710 has a 3-point hitch lift capacity of 1,300 lb (590 kg) at 24 inches behind the link ends. It also lists hitch category Category 0 / Category 1 and hydraulic pump flow 8.2 gpm (31 L/min).
Best rear lift figure1,300 lb (590 kg)
Lift at 24 inches1,300 lb (590 kg)
Hitch categoryCategory 0 / Category 1
Kubota B2710 3-Point Hitch Lift Capacity
3-point hitch lift capacity
1,655 lb (751 kg)
Lift capacity at 24 inches behind link ends
1,300 lb (590 kg)
Hitch category
Category 0 / Category 1
Hydraulic pump flow
8.2 gpm (31 L/min)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,300 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,300 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
8.2 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Kubota B2710 Hitch and Rear Lift Notes
Rear lift capacity note
The key hitch number for the Kubota B2710 is 1,300 lb (590 kg) (lift at 24 inches behind the link ends). In plain terms, it is useful for compact implements like box blades, small tillers, rotary cutters, ballast boxes and rear blades
24-inch lift note
For the Kubota B2710, the 1,300 lb (590 kg) 24-inch lift spec is the one to use when comparing tillers, blades, mowers, seeders and ballast boxes
Hydraulic flow note
Hydraulic pump flow is listed as 8.2 gpm (31 L/min). That is useful context for hydraulic response and some rear or auxiliary hydraulic functions
Rear implement matching
Do not buy rear implements by model number alone. Match the Kubota B2710’s lift capacity against gear like box blade, small rotary cutter, tiller, ballast box, and rear blade
Kubota B2710 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota B2710?
Rear lift capacity for the Kubota B2710 is shown as 1,300 lb (590 kg) for lift at 24 inches behind the link ends. For real attachment matching, stay conservative with heavy attachments and allow margin for implement overhang.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota B2710 is listed at 1,300 lb (590 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota B2710?
Yes. The Kubota B2710 is listed as Category 0 / Category 1, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota B2710?
Start with 1,300 lb (590 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include box blade, small rotary cutter, tiller, ballast box, and rear blade.
Does hydraulic pump flow matter for the Kubota B2710?
Yes, but it is not the same as lift capacity. The Kubota B2710 is listed at 8.2 gpm (31 L/min) hydraulic pump flow, while the rear lift number tells you what the hitch can raise.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
