The Kubota B2630 has a 3-point hitch lift capacity of 1,676 lb (760 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 9.8 gpm (37.1 L/min), and operating weight 1,800 lb (816 kg).
Best rear lift figure1,676 lb (760 kg)
Lift at 24 inches1,676 lb (760 kg)
Hitch categoryCategory 1
Operating weight1,800 lb (816 kg)
Kubota B2630 3-Point Hitch Lift Capacity
3-point hitch lift capacity
2,139 lb (970 kg)
Lift capacity at 24 inches behind link ends
1,676 lb (760 kg)
Hitch category
Category 1
Hydraulic pump flow
9.8 gpm (37.1 L/min)
Operating weight
1,800 lb (816 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,676 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,676 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
9.8 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
1,800 lb
Average
2,600 lb
Low
1,500 lb
High
4,500 lb
Kubota B2630 Hitch and Rear Lift Notes
Rear lift capacity note
The Kubota B2630 rear hitch spec points to 1,676 lb (760 kg) for lift at 24 inches behind the link ends. Use that number before assuming a heavy rear implement will lift safely
24-inch lift note
Use the 24-inch number first. It is usually closer to how a real implement loads the 3-point hitch
Hitch category note
If you are matching implements to the Kubota B2630, start with Category 1, then check lift capacity and tractor stability
Hydraulic flow note
The Kubota B2630’s captured hydraulic pump flow is 9.8 gpm (37.1 L/min). Lift capacity is still the main hitch number, but pump flow helps describe hydraulic capability
Operating weight note
The Kubota B2630 operating weight is listed as 1,800 lb (816 kg). Tractor weight matters because a machine can sometimes lift more than it should comfortably carry on rough ground
Rear implement matching
The practical reason to check rear lift on the Kubota B2630 is implement fit. Think box blade, small rotary cutter, tiller, ballast box, and rear blade, then compare actual implement weight
Kubota B2630 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota B2630?
Rear lift capacity for the Kubota B2630 is shown as 1,676 lb (760 kg) for lift at 24 inches behind the link ends. For real attachment matching, stay conservative with heavy attachments and allow margin for implement overhang.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota B2630 is listed at 1,676 lb (760 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota B2630?
Yes. The Kubota B2630 is listed as Category 1, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota B2630?
Start with 1,676 lb (760 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include box blade, small rotary cutter, tiller, ballast box, and rear blade.
Is lift capacity enough to size implements for the Kubota B2630?
No. The Kubota B2630 may list 1,676 lb (760 kg) of rear lift, but the 1,800 lb (816 kg) operating weight and 9.8 gpm (37.1 L/min) hydraulic flow also matter for real work.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
