Quick answer:
The Cub Cadet XT1 LT46 EFI tractor battery specs found are U1, 12 V (verify with operator manual), 230 CCA, 7.75 × 5.19 × 7.31 in.
Battery sizeU1
Voltage12 V (verify with operator manual)
CCA230 CCA
Case size7.75 × 5.19 × 7.31 in
Cub Cadet XT1 LT46 EFI Battery Specs
| Battery size / group | U1 |
|---|---|
| Battery voltage | 12 V (verify with operator manual) |
| Battery CCA | 230 CCA |
| Battery dimensions | 7.75 × 5.19 × 7.31 in |
| Battery location | The battery on the Cub Cadet XT1 LT46 EFI tractor is located under the seat. |
Battery Spec Benchmarks
CCA benchmark
Voltage benchmark
Case length benchmark
Benchmarks are general reference ranges for lawn and garden tractor batteries.
Cub Cadet XT1 LT46 EFI Battery FAQ
| Replacement battery recommendation | For the Cub Cadet XT1 LT46 EFI tractor, use a battery that matches U1, 230 CCA or higher, case size around 7.75 × 5.19 × 7.31 in. Also match the terminal layout, hold-down style and battery tray clearance before buying. A 12 V battery is shown as a fallback, so verify the voltage in the operator manual before ordering. |
|---|---|
| Battery voltage shown | The battery voltage shown for the Cub Cadet XT1 LT46 EFI tractor is 12 V (verify with operator manual). This was filled because the page had other battery specs but no clear voltage answer. |
| Battery group size found | The battery group size found for the Cub Cadet XT1 LT46 EFI tractor is U1. |
| Battery CCA found | The battery CCA figure found for the Cub Cadet XT1 LT46 EFI tractor is 230 CCA. |
| Battery location | The battery on the Cub Cadet XT1 LT46 EFI tractor is located under the seat. |
| Battery replacement steps | On the Cub Cadet XT1 LT46 EFI, treat the battery swap as a fitment job, not just a voltage match. Use a battery matching 12 V (verify with operator manual), U1, 230 CCA, then disconnect negative first, positive second. Install the replacement, secure the hold-down, reconnect positive first and finish with the negative cable. |
| Bad battery symptoms | With a 12 V (verify with operator manual), U1, 230 CCA setup, the Cub Cadet XT1 LT46 EFI should crank cleanly. If it clicks, cranks slowly, loses charge overnight or needs boosting often, the battery is suspect. |
Official information note
Mistakes do happen. Check the operator manual, service manual and official cubcadet.com website for official battery specifications before buying parts.
