Cub Cadet Z-Force S48 Tractor Dimensions, Length, Width & Height

Quick answer:

The Cub Cadet Z-Force S48 tractor has a 43 in wheelbase.

Wheelbase43 in (3 ft 7 in) / 1,092.2 mm
Ground clearance3.5 in / 88.9 mm

Cub Cadet Z-Force S48 Dimensions

Wheelbase 43 in (3 ft 7 in) / 1,092.2 mm
Ground clearance 3.5 in / 88.9 mm
Rear tread width 18 in (1 ft 6 in) / 457.2 mm

Tractor Size Comparison Chart

Wheelbase comparison

This model

43 in

Average

82 in

Low

48 in

High

130 in

Ground clearance comparison

This model

3.5 in

Average

14 in

Low

6 in

High

26 in

Cub Cadet Z-Force S48 Extra Dimension Notes

Size class note The Cub Cadet Z-Force S48 size data makes the most sense when viewed as a tractor. It is worth checking the listed measurements against your shed, gate, trailer and storage space.
Wheelbase note The Cub Cadet Z-Force S48 wheelbase spec is 43 in (3 ft 7 in) / 1,092.2 mm, which gives better size context than length alone.
Ground clearance note The Cub Cadet Z-Force S48 gives 3.5 in / 88.9 mm ground clearance. Use it when judging ruts, crop clearance and rough access.
Tread width note The Cub Cadet Z-Force S48 rear wheel tread is 18 in (1 ft 6 in) / 457.2 mm. Treat the front tread as unconfirmed here.

Storage Tips

  • Measure the lowest overhead point, not the tallest part of the shed roof.
  • Use the captured specs as a guide, then measure the actual tractor.
  • Wheelbase is 43 in, so leave room to line it up cleanly rather than forcing it through a tight angle.

Storage FAQ

What size garage will fit the tractor?

A tight garage is a bad match when the machine is 43 in wheelbase. The Cub Cadet Z-Force S48 needs a clear opening and bay closer to a measured opening with spare clearance on every side for comfortable storage.

What size door should I check?

The door should be bigger than the tractor by about 12 in of height margin and 18 in of side margin. That puts the target around a measured opening with spare clearance on every side.

Do attachments change the storage size?

Yes. The more the shed fit depends on the exact length not captured length, the more you should remove attachments or choose a deeper bay.

How much maneuvering room should I allow?

Leave turning room outside and walk-around room inside. The tractor is length not captured long, width not captured wide, and has a 43 in wheelbase, so a tight turn beside posts or fences is the real problem.

Official information note

Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official cubcadet.com website for official information.