The Cub Cadet 1650 tractor is 68 in long, 38 in wide, and 40 in tall.
Length68 in (5 ft 8 in) / 1,727.2 mm
Width38 in (3 ft 2 in) / 965.2 mm
Height40 in (3 ft 4 in) / 1,016 mm
Cub Cadet 1650 Dimensions
Overall length
68 in (5 ft 8 in) / 1,727.2 mm
Overall width
38 in (3 ft 2 in) / 965.2 mm
Overall height
40 in (3 ft 4 in) / 1,016 mm
Front tread width
28 in (2 ft 4 in) / 711.2 mm
Rear tread width
27 in (2 ft 3 in) / 685.8 mm
Tractor Size Comparison Chart
Overall length comparison
This model
68 in
Average
105 in
Low
70 in
High
140 in
Overall width comparison
This model
38 in
Average
48 in
Low
34 in
High
66 in
Overall height comparison
This model
40 in
Average
68 in
Low
42 in
High
94 in
Cub Cadet 1650 Extra Dimension Notes
Size class note
The Cub Cadet 1650 falls into small compact tractor size from the available dimensions. It is sized more for acreage, yard work, loader jobs and tight property access than large field work.
Storage fit note
The Cub Cadet 1650 can be treated as a tighter-storage tractor. With length 68 in (5 ft 8 in) / 1,727.2 mm, width 38 in (3 ft 2 in) / 965.2 mm, and height 40 in (3 ft 4 in) / 1,016 mm, check ROPS/cab height and loader length.
Fitment note
For access planning, the Cub Cadet 1650 gives you length at 68 in (5 ft 8 in) / 1,727.2 mm, width at 38 in (3 ft 2 in) / 965.2 mm, and height at 40 in (3 ft 4 in) / 1,016 mm. Measure the opening, not just the indoor floor area.
Tread width note
The Cub Cadet 1650 has tread dimensions of 28 in (2 ft 4 in) / 711.2 mm at the front and 27 in (2 ft 3 in) / 685.8 mm at the rear. Check them where row spacing matters.
Storage Tips
A straight approach into the bay matters more as tractor width and wheelbase increase.
Compact size helps, but a loader or mower can still make the parked footprint much bigger.
Storage FAQ
What size garage will fit the tractor?
This tractor’s 68 in length and 40 in height make ordinary garage storage doubtful unless the opening is oversized. Use 7 ft high, 8 ft wide, 15 ft deep as the practical benchmark.
What size door should I check?
Use the Cub Cadet 1650’s dimensions directly: 40 in tall needs more than a 40 in opening, 38 in wide needs side clearance, and 68 in long needs about 15 ft bay depth.
Do attachments change the storage size?
Yes. If the storage target is 7 ft high, 8 ft wide, and 15 ft deep, attachments should be checked against that, not against the bare 68 in length alone.
How much maneuvering room should I allow?
If an attachment stays on, base the turning room on the attached length, not just the captured 68 in tractor length.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official cubcadet.com website for official information.
