The Kubota M9960 tractor is 78 in wide and 99.8 in tall, with a 90 in wheelbase.
Width78 in (6 ft 6 in) / 1,981.2 mm
Height99.8 in (8 ft 3.8 in) / 2,534.9 mm
Wheelbase90 in (7 ft 6 in) / 2,286 mm
Ground clearance19.7 in (1 ft 7.7 in) / 500.4 mm
Kubota M9960 Dimensions
Overall width
78 in (6 ft 6 in) / 1,981.2 mm
Overall height
99.8 in (8 ft 3.8 in) / 2,534.9 mm
Wheelbase
90 in (7 ft 6 in) / 2,286 mm
Ground clearance
19.7 in (1 ft 7.7 in) / 500.4 mm
Tractor Size Comparison Chart
Overall width comparison
This model
78 in
Average
165 in
Low
120 in
High
220 in
Overall height comparison
This model
99.8 in
Average
160 in
Low
125 in
High
220 in
Wheelbase comparison
This model
90 in
Average
180 in
Low
130 in
High
260 in
Ground clearance comparison
This model
19.7 in
Average
28 in
Low
18 in
High
45 in
Kubota M9960 Extra Dimension Notes
Storage fit note
For the Kubota M9960, storage should be planned around a taller opening. With width 78 in (6 ft 6 in) / 1,981.2 mm and height 99.8 in (8 ft 3.8 in) / 2,534.9 mm, height is likely the key check.
Fitment note
The Kubota M9960 physical size reads as width at 78 in (6 ft 6 in) / 1,981.2 mm and height at 99.8 in (8 ft 3.8 in) / 2,534.9 mm. Use those values as the baseline before adding implement length.
Wheelbase note
The Kubota M9960 wheelbase is 90 in (7 ft 6 in) / 2,286 mm. That number is worth checking if you care about loader stability or ride feel.
Ground clearance note
The Kubota M9960 ground clearance comes through as 19.7 in (1 ft 7.7 in) / 500.4 mm. It matters when the ground is not flat and clean.
Storage Tips
Do not use exact dimensions as the storage target; allow clearance for ROPS/cab setup, mirrors and attachments.
Use the bare dimensions only as a starting point; a practical storage target is 12 ft high and 12 ft wide.
For this class, doorway width and attachment clearance are major planning numbers.
Use the 90 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
What size garage will fit the tractor?
At 78 in wide, 99.8 in tall, and 90 in wheelbase, a tall garage or small shed is the realistic starting point. Use about 12 ft high and 12 ft wide before counting attachments.
What size door should I check?
The door should be bigger than the tractor by about 36 in of height margin and 48 in of side margin. That puts the target around 12 ft high and 12 ft wide.
Do attachments change the storage size?
Yes. Keep the bare dimensions in mind: length not captured long, 78 in wide and 99.8 in tall. Then add attachment overhang, folded ROPS/cab height and mower or tire width.
How much maneuvering room should I allow?
A short answer: give the tractor enough room to approach straight, not just enough room to fit inside. With 90 in wheelbase, about 17 ft outside the opening is a better check.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official kubotausa.com website for official information.
