The Kubota M135GX-III tractor is 82.7 in wide and 113.6 in tall.
Kubota M135GX-III Dimensions
| Overall width | 82.7 in (6 ft 10.7 in) / 2,100.6 mm |
|---|---|
| Overall height | 113.6 in (9 ft 5.6 in) / 2,885.4 mm |
| Ground clearance | 24.3 in (2 ft 0.3 in) / 617.2 mm |
Tractor Size Comparison Chart
Overall width comparison
Overall height comparison
Ground clearance comparison
Kubota M135GX-III Extra Dimension Notes
| Storage fit note | The Kubota M135GX-III is not something to squeeze into tight domestic storage. With width 82.7 in (6 ft 10.7 in) / 2,100.6 mm and height 113.6 in (9 ft 5.6 in) / 2,885.4 mm, use machinery-shed expectations. |
|---|---|
| Fitment note | The Kubota M135GX-III has listed dimensions of width at 82.7 in (6 ft 10.7 in) / 2,100.6 mm and height at 113.6 in (9 ft 5.6 in) / 2,885.4 mm. Treat them as the starting point for storage and trailer planning. |
| Ground clearance note | The Kubota M135GX-III shows 24.3 in (2 ft 0.3 in) / 617.2 mm ground clearance. That is the underside clearance figure in the dimension set. |
Storage Tips
- Leave room around the Kubota M135GX-III for mirrors, steps, tires, cab/ROPS and attachments.
- Use the bare dimensions only as a starting point; a practical storage target is 14 ft high and 12 ft wide.
- For this class, doorway width and attachment clearance are major planning numbers.
- Overhead clearance should be measured at the lowest part of the doorway, not the tallest part of the shed.
Storage FAQ
What size garage will fit the tractor?
This tractor’s length not captured length and 113.6 in height make ordinary garage storage doubtful unless the opening is oversized. Use 14 ft high, 12 ft wide as the practical benchmark.
What size door should I check?
Measure the real clear opening, not the advertised door size. You need it to clear the Kubota M135GX-III’s 113.6 in height and 82.7 in width, with about the tractor length plus attachment room for the length not captured length.
Do attachments change the storage size?
Yes. The published length not captured length is useful for the bare tractor, but the real storage number is the longest point from front attachment to rear attachment.
How much maneuvering room should I allow?
A straight run into the bay is the cleanest setup. For a length not captured long tractor, about a clear straight approach before the doorway outside the door is a better benchmark than squeezing in from a tight turn.
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official kubotausa.com website for official information.


