The Kubota M95GX-III tractor is 95.9 in long, 74.8 in wide, and 82.7 in tall.
Kubota M95GX-III Dimensions
| Overall length | 95.9 in (7 ft 11.9 in) / 2,435.9 mm |
|---|---|
| Overall width | 74.8 in (6 ft 2.8 in) / 1,899.9 mm |
| Overall height | 82.7 in (6 ft 10.7 in) / 2,100.6 mm |
Tractor Size Comparison Chart
Overall length comparison
Overall width comparison
Overall height comparison
Kubota M95GX-III Extra Dimension Notes
| Fitment note | The Kubota M95GX-III size data gives length at 95.9 in (7 ft 11.9 in) / 2,435.9 mm, width at 74.8 in (6 ft 2.8 in) / 1,899.9 mm, and height at 82.7 in (6 ft 10.7 in) / 2,100.6 mm. Add margin for cab roof, loader arms, mirrors and wheel equipment. |
|---|
Storage Tips
- Measure the lowest overhead point, not the tallest part of the shed roof.
- Do not assume residential garage fit unless height and bay depth both clear comfortably.
Storage FAQ
What size garage will fit the tractor?
At 95.9 in long, 74.8 in wide, and 82.7 in tall, a garage may work only if the door and bay are bigger than the tractor, not just equal to it. Use about 8 ft high, 8 ft wide, and 15 ft deep before counting attachments.
What size door should I check?
The clean check is 8 ft high, 8 ft wide and 15 ft deep. That gives margin over the listed 82.7 in height, 74.8 in width and 95.9 in length.
Do attachments change the storage size?
Yes. Check attachments against all three numbers: 82.7 in for overhead clearance, 74.8 in for side clearance and 95.9 in for bay depth.
How much maneuvering room should I allow?
Use the 95.9 in length as the maneuvering clue here. A bay around 15 ft deep still needs approach room outside the shed, especially if implements stay fitted.
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official kubotausa.com website for official information.

