The Kubota M1-85 tractor is 48 in wide, with a 90.6 in wheelbase.
Width48 in (4 ft 0 in) / 1,219.2 mm
Wheelbase90.6 in (7 ft 6.6 in) / 2,301.2 mm
Ground clearance16.5 in (1 ft 4.5 in) / 419.1 mm
Kubota M1-85 Dimensions
Overall width
48 in (4 ft 0 in) / 1,219.2 mm
Wheelbase
90.6 in (7 ft 6.6 in) / 2,301.2 mm
Ground clearance
16.5 in (1 ft 4.5 in) / 419.1 mm
Front tread width
48 in (4 ft 0 in) / 1,219.2 mm
Rear tread width
48 in (4 ft 0 in) / 1,219.2 mm
Tractor Size Comparison Chart
Overall width comparison
This model
48 in
Average
165 in
Low
120 in
High
220 in
Wheelbase comparison
This model
90.6 in
Average
180 in
Low
130 in
High
260 in
Ground clearance comparison
This model
16.5 in
Average
28 in
Low
18 in
High
45 in
Kubota M1-85 Extra Dimension Notes
Fitment note
For the Kubota M1-85, width at 48 in (4 ft 0 in) / 1,219.2 mm are the real-world clearance numbers. Compare them with the tightest door, gate or trailer point.
Wheelbase note
The Kubota M1-85 lists a 90.6 in (7 ft 6.6 in) / 2,301.2 mm wheelbase. It is a good size-comparison spec for buyers.
Ground clearance note
The Kubota M1-85’s ground clearance is 16.5 in (1 ft 4.5 in) / 419.1 mm. This is a practical fitment number, not just a spec-sheet extra.
Tread width note
The Kubota M1-85 tread-width numbers are 48 in (4 ft 0 in) / 1,219.2 mm at the front and 48 in (4 ft 0 in) / 1,219.2 mm at the rear. They are worth comparing against similar tractors.
Storage Tips
If the tractor is stored with a loader or rear implement, add more bay depth than the bare length suggests.
Big tractors need service room around them, not just enough space to squeeze inside.
A 90.6 in wheelbase means the approach into the storage bay matters, not just the doorway width.
Storage FAQ
What size garage will fit the tractor?
A garage may work only when the clear opening is larger than height not captured high and 48 in wide, and the bay is longer than length not captured. For this machine, use 8 ft wide as the better rule.
What size door should I check?
Do not size the door to exactly height not captured by 48 in. For this model, use about the tractor height plus clearance height and 8 ft width, then allow the tractor length plus attachment room depth for the length not captured tractor length.
Do attachments change the storage size?
Yes. A tight bay should be planned around the attached setup. For this very large farm tractor, allow about 8 ft to 15 ft extra depth if gear stays on.
How much maneuvering room should I allow?
If the door is close to the 8 ft target, approach angle matters more. The Kubota M1-85’s 48 in width and 90.6 in wheelbase need a clean line into the bay.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official kubotausa.com website for official information.
