The Kubota L1-26 tractor is 121.7 in long, 54.3 in wide, and 77.8 in tall.
Length121.7 in (10 ft 1.7 in) / 3,091.2 mm
Width54.3 in (4 ft 6.3 in) / 1,379.2 mm
Height77.8 in (6 ft 5.8 in) / 1,976.1 mm
Kubota L1-26 Dimensions
Overall length
121.7 in (10 ft 1.7 in) / 3,091.2 mm
Overall width
54.3 in (4 ft 6.3 in) / 1,379.2 mm
Overall height
77.8 in (6 ft 5.8 in) / 1,976.1 mm
Tractor Size Comparison Chart
Overall length comparison
This model
121.7 in
Average
125 in
Low
100 in
High
155 in
Overall width comparison
This model
54.3 in
Average
60 in
Low
45 in
High
78 in
Overall height comparison
This model
77.8 in
Average
89 in
Low
70 in
High
108 in
Kubota L1-26 Extra Dimension Notes
Storage fit note
For shed fit, the Kubota L1-26 is not oversized. With length 121.7 in (10 ft 1.7 in) / 3,091.2 mm, width 54.3 in (4 ft 6.3 in) / 1,379.2 mm, and height 77.8 in (6 ft 5.8 in) / 1,976.1 mm, a good garage, carport or compact shed may be workable.
Fitment note
For the Kubota L1-26, the main fitment numbers are length at 121.7 in (10 ft 1.7 in) / 3,091.2 mm, width at 54.3 in (4 ft 6.3 in) / 1,379.2 mm, and height at 77.8 in (6 ft 5.8 in) / 1,976.1 mm. These are the specs to check against a shed, trailer or gate.
Storage Tips
For the Kubota L1-26, small-shed storage is realistic if the opening has usable margin, not just a perfect-on-paper fit.
Measure the lowest overhead point, not the tallest part of the shed roof.
Storage FAQ
What size garage will fit the tractor?
At 121.7 in long, 54.3 in wide, and 77.8 in tall, a garage may work only if the door and bay are bigger than the tractor, not just equal to it. Use about 8 ft high, 8 ft wide, and 15 ft deep before counting attachments.
What size door should I check?
The clean check is 8 ft high, 8 ft wide and 15 ft deep. That gives margin over the listed 77.8 in height, 54.3 in width and 121.7 in length.
Do attachments change the storage size?
Yes. Check attachments against all three numbers: 77.8 in for overhead clearance, 54.3 in for side clearance and 121.7 in for bay depth.
How much maneuvering room should I allow?
If an attachment stays on, base the turning room on the attached length, not just the captured 121.7 in tractor length.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official kubotausa.com website for official information.
