The Kubota KB17X tractor is 96 in long, 48 in wide, and 72 in tall, with a 53.2 in wheelbase.
Length96 in (8 ft 0 in) / 2,438.4 mm
Width48 in (4 ft 0 in) / 1,219.2 mm
Height72 in (6 ft 0 in) / 1,828.8 mm
Wheelbase53.2 in (4 ft 5.2 in) / 1,351.3 mm
Ground clearance13.2 in (1 ft 1.2 in) / 335.3 mm
Kubota KB17X Dimensions
Overall length
96 in (8 ft 0 in) / 2,438.4 mm
Overall width
48 in (4 ft 0 in) / 1,219.2 mm
Overall height
72 in (6 ft 0 in) / 1,828.8 mm
Wheelbase
53.2 in (4 ft 5.2 in) / 1,351.3 mm
Ground clearance
13.2 in (1 ft 1.2 in) / 335.3 mm
Front tread width
33.5 in (2 ft 9.5 in) / 850.9 mm
Tractor Size Comparison Chart
Overall length comparison
This model
96 in
Average
105 in
Low
70 in
High
140 in
Overall width comparison
This model
48 in
Average
48 in
Low
34 in
High
66 in
Overall height comparison
This model
72 in
Average
68 in
Low
42 in
High
94 in
Wheelbase comparison
This model
53.2 in
Average
58 in
Low
42 in
High
74 in
Ground clearance comparison
This model
13.2 in
Average
9 in
Low
5 in
High
14 in
Kubota KB17X Extra Dimension Notes
Size class note
From a storage and access point of view, the Kubota KB17X behaves like a small compact tractor. It is sized more for acreage, yard work, loader jobs and tight property access than large field work.
Fitment note
The Kubota KB17X is best judged by length at 96 in (8 ft 0 in) / 2,438.4 mm, width at 48 in (4 ft 0 in) / 1,219.2 mm, and height at 72 in (6 ft 0 in) / 1,828.8 mm. The biggest issue is usually width or height, not just floor length.
Wheelbase note
The Kubota KB17X gives a wheelbase figure of 53.2 in (4 ft 5.2 in) / 1,351.3 mm. That helps describe the tractor’s stance.
Ground clearance note
The Kubota KB17X ground clearance spec is 13.2 in (1 ft 1.2 in) / 335.3 mm. It helps decide how forgiving the tractor is on uneven ground.
Tread width note
Front tread for the Kubota KB17X is listed as 33.5 in (2 ft 9.5 in) / 850.9 mm. The rear figure was not captured clearly.
Storage Tips
Floor space is not enough; check the door height, side clearance and attachment length.
Use the bare dimensions only as a starting point; a practical storage target is a clear opening around 7 ft high, 8 ft wide, and 15 ft deep.
This is a smaller tractor class, so tight acreage sheds and small equipment bays are realistic if the doorway clears.
Use the 53.2 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
What size garage will fit the tractor?
For this small compact tractor, garage fit is not a yes/no from the model name. Compare the actual 96 in length, 48 in width and 72 in height against a clear 7 ft high, 8 ft wide, 15 ft deep space.
What size door should I check?
Do not size the door to exactly 72 in by 48 in. For this model, use about 7 ft height and 8 ft width, then allow 15 ft depth for the 96 in tractor length.
Do attachments change the storage size?
Yes. A tight bay should be planned around the attached setup. For this small compact tractor, allow about 2 ft to 4 ft extra depth if gear stays on.
How much maneuvering room should I allow?
If the door is close to the 8 ft target, approach angle matters more. The Kubota KB17X’s 48 in width and 53.2 in wheelbase need a clean line into the bay.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official kubotausa.com website for official information.
