Kubota GL25 Tractor Dimensions, Length, Width & Height

Quick answer:

The Kubota GL25 tractor is 120.1 in long, 53.2 in wide, and 57.3 in tall, with a 64.8 in wheelbase.

Length120.1 in (10 ft 0.1 in) / 3,050.5 mm
Width53.2 in (4 ft 5.2 in) / 1,351.3 mm
Height57.3 in (4 ft 9.3 in) / 1,455.4 mm
Wheelbase64.8 in (5 ft 4.8 in) / 1,645.9 mm
Ground clearance13.6 in (1 ft 1.6 in) / 345.4 mm

Kubota GL25 Dimensions

Overall length 120.1 in (10 ft 0.1 in) / 3,050.5 mm
Overall width 53.2 in (4 ft 5.2 in) / 1,351.3 mm
Overall height 57.3 in (4 ft 9.3 in) / 1,455.4 mm
Wheelbase 64.8 in (5 ft 4.8 in) / 1,645.9 mm
Ground clearance 13.6 in (1 ft 1.6 in) / 345.4 mm
Front tread width 36 in (3 ft 0 in) / 914.4 mm
Rear tread width 36 in (3 ft 0 in) / 914.4 mm

Tractor Size Comparison Chart

Overall length comparison

This model

120.1 in

Average

125 in

Low

100 in

High

155 in

Overall width comparison

This model

53.2 in

Average

60 in

Low

45 in

High

78 in

Overall height comparison

This model

57.3 in

Average

89 in

Low

70 in

High

108 in

Wheelbase comparison

This model

64.8 in

Average

72 in

Low

58 in

High

88 in

Ground clearance comparison

This model

13.6 in

Average

12 in

Low

8 in

High

17 in

Kubota GL25 Extra Dimension Notes

Fitment note The Kubota GL25 fitment answer depends on length at 120.1 in (10 ft 0.1 in) / 3,050.5 mm, width at 53.2 in (4 ft 5.2 in) / 1,351.3 mm, and height at 57.3 in (4 ft 9.3 in) / 1,455.4 mm. These are the numbers to compare with your real storage space.
Wheelbase note The Kubota GL25 has a 64.8 in (5 ft 4.8 in) / 1,645.9 mm wheelbase, giving it a compact tractor stance in practical terms.
Ground clearance note The captured Kubota GL25 ground clearance is 13.6 in (1 ft 1.6 in) / 345.4 mm. It helps explain how much obstacle clearance the tractor has.
Tread width note The Kubota GL25 front/rear tread numbers are 36 in (3 ft 0 in) / 914.4 mm at the front and 36 in (3 ft 0 in) / 914.4 mm at the rear. These are useful when comparing stance across similar models.

Storage Tips

  • Measure the lowest overhead point, not the tallest part of the shed roof.
  • Do not assume residential garage fit unless height and bay depth both clear comfortably.
  • A 64.8 in wheelbase means the approach into the storage bay matters, not just the doorway width.

Storage FAQ

What size garage will fit the tractor?

If your garage door is close to 57.3 in tall or 53.2 in wide, count it as too tight. The safer check for the Kubota GL25 is around 7 ft high, 8 ft wide, and 15 ft deep.

What size door should I check?

A bare fit only says the tractor can squeeze through. For normal use, the Kubota GL25’s 57.3 in height and 53.2 in width point to about 7 ft high and 8 ft wide, with 15 ft depth.

Do attachments change the storage size?

Yes. If the bay only clears the listed 120.1 in length, it is too short once attachments stay on. Use about 15 ft bare, then add attachment length.

How much maneuvering room should I allow?

The 120.1 in length needs bay depth, but the 64.8 in wheelbase needs lineup room. Treat about 12 ft outside the shed as the practical approach zone.

Official information note

Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official kubotausa.com website for official information.