The recommended trailer size for a John Deere X350 tractor is a 5×10 utility trailer based on length and width. Check payload, ramp rating, brakes and tie-down capacity before hauling.
Transport classDeck-size guide onlyTrailer type guide
John Deere X350 Trailer Size Specs
Recommended trailer size
5×10 utility trailer
Transport class
Deck-size guide only
Minimum deck length
8 ft (96 in)
Minimum deck width
5 ft (60 in)
Overall length
72 in (6 ft / 1,829 mm)
Overall width
38.4 in (3.2 ft / 975 mm)
Overall height
47 in (3.9 ft / 1,194 mm)
Wheelbase
49.4 in (4.1 ft / 1,255 mm)
John Deere X350 Trailer Fit Chart
Trailer fit size guide
Length
6 ft
Width
3.2 ft
Payload guide
No usable machine weight was found for this row, so this page treats the trailer answer as a deck-size fit guide only. Before hauling, confirm the real loaded weight against the trailer payload placard, ramp rating, brakes and tie-down capacity.
Will a John Deere X350 Fit on Common Trailer Sizes?
5×8 trailer
Maybe Possible by deck size only if deck length is tight, especially with attachments. Confirm trailer payload, ramps, brakes, tie-downs and attachments before hauling.
5×10 trailer
Likely Likely fits by deck size only. Confirm trailer payload, ramp rating, brakes, tie-downs and attachment weight before hauling.
6×10 trailer
Likely Likely fits by deck size only. Confirm trailer payload, ramp rating, brakes, tie-downs and attachment weight before hauling.
6×12 trailer
Likely Likely fits by deck size only. Confirm trailer payload, ramp rating, brakes, tie-downs and attachment weight before hauling.
6×14 trailer
Likely Likely fits by deck size only. Confirm trailer payload, ramp rating, brakes, tie-downs and attachment weight before hauling.
7×16 trailer
Likely Likely fits by deck size only. Confirm trailer payload, ramp rating, brakes, tie-downs and attachment weight before hauling.
John Deere X350 Trailer Setup Guide
Bare machine
Start with a 5×10 utility trailer for deck size. Because no usable machine weight was found, confirm payload on the trailer placard before hauling
Mower deck or collection system
A mower deck, bagger or collection system can increase width and weight, so check clearance between trailer fenders and side rails
Snow or rear attachments
A snow blade, snow blower, rear attachment or hitch-mounted accessory can add length and weight. Measure the real setup, not just the bare machine
Weights and loaded tires
Wheel weights, suitcase weights and loaded tires increase payload demand. Use the real loaded weight before choosing the trailer
John Deere X350 Hauling Notes
Trailer size note
For the John Deere X350, the practical trailer starting point is 5×10 utility trailer. Treat this as a deck-size fit guide for the machine; confirm payload, ramp rating and tie-down capacity separately
Deck length note
Deck length should be longer than the machine’s listed 72 in (6 ft / 1,829 mm) overall length so it can sit safely and be balanced over the axle
Deck width note
Usable deck width matters more than advertised trailer width. The John Deere X350 is listed at 38.4 in (3.2 ft / 975 mm) wide, so check fender and rail clearance
Payload note
No usable machine weight was found for this row, so treat this as a deck-size fit guide only. Confirm payload rating, ramp rating, brakes and tie-down capacity before hauling
Ramp and tie-down note
Check ramp capacity, ramp angle, trailer brakes, axle rating and tie-down points. A machine that fits on the deck can still be unsafe if the trailer hardware is under-rated
Height note
The listed overall height is 47 in (3.9 ft / 1,194 mm). This matters for enclosed trailers, garage doors, carports and low roof clearance
John Deere X350 Trailer Size FAQ
What size trailer do I need for a John Deere X350?
The recommended trailer size for a John Deere X350 tractor is a 5×10 utility trailer based on length and width. Check payload, ramp rating, brakes and tie-down capacity before hauling
How long should a trailer be for a John Deere X350?
Use at least 8 ft (96 in) of deck length as the starting point. The machine’s listed overall length is 72 in (6 ft / 1,829 mm), and attachments can make the real transport length longer
How wide should a trailer be for a John Deere X350?
Use around 5 ft (60 in) of usable deck width as the starting point. The John Deere X350 is listed at 38.4 in (3.2 ft / 975 mm) wide, but trailer fenders, rails and attachments can reduce clearance
Can I choose a trailer for a John Deere X350 without a weight spec?
You can choose the deck length and width, but not the final safe payload. Use this page for physical fit, then confirm the machine’s real loaded weight against the trailer placard and ramp rating
Will a John Deere X350 fit on a 5×10 trailer?
Likely fits by deck size only. Confirm trailer payload, ramp rating, brakes, tie-downs and attachment weight before hauling
Is a utility trailer enough for a John Deere X350?
A utility trailer can work if the John Deere X350 fits the deck and the trailer payload, ramps, brakes and tie-downs are rated for the real loaded machine
Official information note
Mistakes do happen. Trailer fit can change by tire setup, mower deck, collection system, weights, attachments and trailer design. Check the operator manual, service manual, trailer placard, local transport rules and official deere.com website before hauling the tractor.
