Coolant capacity for the John Deere Z710A is 1.59 gal (6 L). The coolant type is listed as John Deere Cool-Gard II, and the antifreeze mix is 40/60 coolant and water mix.
Coolant capacity1.59 gal (6 L)Cooling system refill amount
Antifreeze mix40/60 coolant and water mixFreeze/boil protection
John Deere Z710A Coolant Capacity Specs
Coolant capacity
1.59 gal (6 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
40/60 coolant and water mix
Engine horsepower
25 hp
Engine displacement
44.2 cu in (0.72 L)
John Deere Z710A Coolant Capacity Guide
Coolant capacity guide
This model
1.59 gal
Class low
0.5 gal
Class typical
2.5 gal
Class high
4.5 gal
Compared with a broad ztrak / mower guide, not the full tractor dataset.
John Deere Z710A Coolant Service Notes
Coolant capacity note
The useful service number here is 1.59 gal (6 L). Keep some extra coolant available because trapped air can lower the level after the first warm-up
Coolant service note
A proper coolant change on the John Deere Z710A means using the 1.59 gal (6 L) capacity and keeping the coolant chemistry consistent with John Deere Cool-Gard II and 40/60 coolant and water mix
Coolant type note
For the John Deere Z710A, coolant choice is listed as John Deere Cool-Gard II. Capacity tells you how much; coolant type tells you what to use
Antifreeze mix note
The John Deere Z710A coolant mix guidance is 40/60 coolant and water mix. This matters most in freezing weather, hot work and long service intervals
Refill check
For the John Deere Z710A, 1.59 gal (6 L) is the planned refill amount. The final level may need a small top-up after trapped air leaves the system
Engine context
The John Deere Z710A engine specs listed with this page are engine horsepower 25 hp and engine displacement 44.2 cu in (0.72 L). They help identify the machine, but they are not a substitute for the coolant capacity
John Deere Z710A Coolant Capacity FAQ
What is the John Deere Z710A cooling system capacity?
The listed coolant amount for the John Deere Z710A is 1.59 gal (6 L). It is a refill guide, not a reason to ignore the actual level marks
What coolant is recommended for the John Deere Z710A?
The John Deere Z710A is listed with John Deere Cool-Gard II coolant guidance. If topping up, match the existing coolant type instead of mixing random antifreeze
What antifreeze mix should the John Deere Z710A use?
The John Deere Z710A antifreeze guidance is 40/60 coolant and water mix. Check the coolant label before mixing concentrate and water
Can the John Deere Z710A coolant level drop after refilling?
After refilling the John Deere Z710A, run the engine to operating temperature, let it cool and recheck the radiator or overflow level. Air pockets can make the level drop
Should I flush the John Deere Z710A cooling system or just top it up?
A top-up is only a level correction. A flush is the better choice if the John Deere Z710A has rusty coolant, oil contamination, mixed coolant types or repeated overheating
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
