The John Deere X950R takes 0.74 gal (2.8 L) of coolant, with required for the system to operate effectively The John Deere X950R tractor has a coolant listed as the coolant type.
Coolant capacity0.74 gal (2.8 L)Cooling system refill amount
Coolant typerequired for the system to operate effectively The John Deere X950R tractor has a coolantMatch coolant chemistry
John Deere X950R Coolant Capacity Specs
Coolant capacity
0.74 gal (2.8 L)
Coolant type
required for the system to operate effectively The John Deere X950R tractor has a coolant
Engine model
Yanmar 3TNV76
Engine horsepower
24.5 hp
Engine displacement
68.1 cu in (1.12 L)
John Deere X950R Coolant Capacity Guide
Coolant capacity guide
This model
0.74 gal
Class low
0.5 gal
Class typical
2.5 gal
Class high
4.5 gal
Compared with a broad ztrak / mower guide, not the full tractor dataset.
John Deere X950R Coolant Service Notes
Coolant capacity note
The John Deere X950R coolant capacity is 0.74 gal (2.8 L). Treat it as a cooling-system amount, not a radiator-only top-up amount
Coolant service note
For a full coolant service on the John Deere X950R, plan around 0.74 gal (2.8 L) and match the listed coolant guidance: required for the system to operate effectively The John Deere X950R tractor has a coolant
Coolant type note
The John Deere X950R coolant type is required for the system to operate effectively The John Deere X950R tractor has a coolant. Wrong coolant chemistry can reduce corrosion, freeze and boil protection
Refill check
After a drain and refill on the John Deere X950R, the cooling system can burp air. Recheck the level after the first warm-up and cool-down cycle
Engine context
The John Deere X950R engine specs listed with this page are engine model Yanmar 3TNV76, engine horsepower 24.5 hp, and engine displacement 68.1 cu in (1.12 L). They help identify the machine, but they are not a substitute for the coolant capacity
John Deere X950R Coolant Capacity FAQ
How much coolant is needed for a John Deere X950R coolant change?
The cooling system capacity for the John Deere X950R is 0.74 gal (2.8 L). This is the main refill figure for a drain, flush or coolant change
Can I use John Deere Cool-Gard in the John Deere X950R?
For the John Deere X950R, the coolant type is listed as required for the system to operate effectively The John Deere X950R tractor has a coolant. Avoid mixing incompatible coolant products
Should I bleed air after changing coolant in the John Deere X950R?
Fill the John Deere X950R slowly, run it with the heater/thermostat cycle where applicable, let it cool and check the level again. That helps catch trapped air
When should I flush the John Deere X950R cooling system?
Flush the John Deere X950R cooling system if the coolant is dirty, contaminated, badly diluted or overdue for service. A simple top-up does not fix old coolant chemistry
Can I mix coolant types when topping up the John Deere X950R?
Match coolant by specification, not just color. For the John Deere X950R, the listed coolant guidance is required for the system to operate effectively The John Deere X950R tractor has a coolant. If compatibility is unclear, flush and refill rather than mixing types
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
