The John Deere X734 coolant capacity is 3.3 gal (12.5 L). Use this as the cooling-system refill amount and recheck the level after the engine cools.
John Deere X734 Coolant Capacity Specs
| Coolant capacity | 3.3 gal (12.5 L) |
|---|---|
| Engine model | Kawasaki FD750D |
| Engine horsepower | 25.5 hp |
John Deere X734 Coolant Capacity Guide
Coolant capacity guide
Compared with a broad ztrak / mower guide, not the full tractor dataset.
John Deere X734 Coolant Service Notes
| Coolant capacity note | The John Deere X734 cooling system is listed at 3.3 gal (12.5 L). Final level can settle after the first heat cycle, so recheck the level after service |
|---|---|
| Coolant service note | Use 3.3 gal (12.5 L) as the refill guide for the John Deere X734. The final level should still be confirmed at the radiator or overflow bottle |
| Refill check | Use the 3.3 gal (12.5 L) capacity to buy enough coolant for the John Deere X734, but finish the job by checking the actual level marks |
| Engine context | For comparison, the John Deere X734 engine details listed here are engine model Kawasaki FD750D and engine horsepower 25.5 hp. The coolant capacity remains the service number to use for refilling |
John Deere X734 Coolant Capacity FAQ
How much coolant does the John Deere X734 take?
The John Deere X734 takes 3.3 gal (12.5 L) of coolant. Final level can settle after trapped air leaves the cooling system
Do I need to recheck coolant level after servicing the John Deere X734?
After a coolant change on the John Deere X734, check for leaks, watch temperature and recheck the level once the engine cools down
When should contaminated coolant be replaced in the John Deere X734?
Low level, bad smell, rust, sludge, oil film or overheating are signs to inspect the John Deere X734 cooling system rather than only topping it up
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.







