The John Deere X724 coolant capacity is 1.59 gal (6 L). The listed coolant is John Deere Cool-Gard II, with For the John Deere X724 tractor, the recommended coolant is John Deere COOL-GARD II guidance.
Coolant capacity1.59 gal (6 L)Cooling system refill amount
Antifreeze mixFor the John Deere X724 tractor, the recommended coolant is John Deere COOL-GARD IIFreeze/boil protection
John Deere X724 Coolant Capacity Specs
Coolant capacity
1.59 gal (6 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
For the John Deere X724 tractor, the recommended coolant is John Deere COOL-GARD II
Engine horsepower
27 hp
Engine displacement
45.5 cu in (0.75 L)
John Deere X724 Coolant Capacity Guide
Coolant capacity guide
This model
1.59 gal
Class low
0.5 gal
Class typical
2.5 gal
Class high
4.5 gal
Compared with a broad ztrak / mower guide, not the full tractor dataset.
John Deere X724 Coolant Service Notes
Coolant capacity note
For the John Deere X724, the coolant capacity is 1.59 gal (6 L). That is the buying and refill guide for a full cooling-system service
Coolant service note
Use 1.59 gal (6 L) as the refill amount for the John Deere X724, but do not mix coolant types blindly. The listed coolant detail is John Deere Cool-Gard II and For the John Deere X724 tractor, the recommended coolant is John Deere COOL-GARD II
Coolant type note
The listed coolant type for the John Deere X724 is John Deere Cool-Gard II. Match the coolant chemistry before topping up or flushing the system
Antifreeze mix note
The listed antifreeze mix for the John Deere X724 is For the John Deere X724 tractor, the recommended coolant is John Deere COOL-GARD II. Mix ratio affects freeze protection, boil protection and corrosion control
Refill check
When refilling the John Deere X724, do not pour in 1.59 gal (6 L) and walk away. Fill slowly, run the engine, let it cool and recheck the level
Engine context
The engine context for the John Deere X724 is engine horsepower 27 hp and engine displacement 45.5 cu in (0.75 L). Use this for comparison only; the refill amount is the coolant capacity above
John Deere X724 Coolant Capacity FAQ
What is the John Deere X724 coolant capacity?
The John Deere X724 coolant capacity is 1.59 gal (6 L). Use this as the cooling-system refill amount and recheck the level after warm-up and cool-down
Which coolant is listed for the John Deere X724?
Use John Deere Cool-Gard II or a coolant that clearly meets the same requirement for the John Deere X724. Do not rely on color alone because coolant color is not a perfect chemistry guide
Does the John Deere X724 need a 50/50 coolant mix?
The John Deere X724 uses For the John Deere X724 tractor, the recommended coolant is John Deere COOL-GARD II where that mix is specified. Confirm the mix against your climate and manual
What should I check after refilling coolant in the John Deere X724?
The John Deere X724 may need a small top-up after the first heat cycle. Fill slowly, watch for leaks and recheck the level when cool
Is a coolant top-up enough before using the John Deere X724?
Use a full coolant service on the John Deere X724 when the system needs fresh coolant, not just more coolant. Plan the refill around the 1.59 gal (6 L) capacity
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
