Coolant capacity for the John Deere X595 is 0.74 gal (2.8 L). The coolant type is listed as John Deere Cool-Gard II, and the antifreeze mix is The recommended coolant for the John Deere X595 tractor is John Deere Cool-Gard II, which.
Coolant capacity0.74 gal (2.8 L)Cooling system refill amount
Antifreeze mixThe recommended coolant for the John Deere X595 tractor is John Deere Cool-Gard II, whichFreeze/boil protection
John Deere X595 Coolant Capacity Specs
Coolant capacity
0.74 gal (2.8 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
The recommended coolant for the John Deere X595 tractor is John Deere Cool-Gard II, which
Engine model
Yanmar engin
Engine horsepower
24 hp
John Deere X595 Coolant Capacity Guide
Coolant capacity guide
This model
0.74 gal
Class low
0.5 gal
Class typical
2.5 gal
Class high
4.5 gal
Compared with a broad ztrak / mower guide, not the full tractor dataset.
John Deere X595 Coolant Service Notes
Coolant capacity note
The John Deere X595 cooling system is listed at 0.74 gal (2.8 L). Final level can settle after the first heat cycle, so recheck the level after service
Coolant service note
A proper coolant change on the John Deere X595 means using the 0.74 gal (2.8 L) capacity and keeping the coolant chemistry consistent with John Deere Cool-Gard II and The recommended coolant for the John Deere X595 tractor is John Deere Cool-Gard II, which
Coolant type note
For the John Deere X595, coolant choice is listed as John Deere Cool-Gard II. Capacity tells you how much; coolant type tells you what to use
Antifreeze mix note
The John Deere X595 coolant mix guidance is The recommended coolant for the John Deere X595 tractor is John Deere Cool-Gard II, which. This matters most in freezing weather, hot work and long service intervals
Refill check
For the John Deere X595, 0.74 gal (2.8 L) is the planned refill amount. The final level may need a small top-up after trapped air leaves the system
Engine context
The engine context for the John Deere X595 is engine model Yanmar engin and engine horsepower 24 hp. Use this for comparison only; the refill amount is the coolant capacity above
John Deere X595 Coolant Capacity FAQ
What is the refill amount for the John Deere X595 cooling system?
The listed coolant amount for the John Deere X595 is 0.74 gal (2.8 L). It is a refill guide, not a reason to ignore the actual level marks
What should I match when topping up coolant in the John Deere X595?
The John Deere X595 is listed with John Deere Cool-Gard II coolant guidance. If topping up, match the existing coolant type instead of mixing random antifreeze
What antifreeze mix should the John Deere X595 use?
The John Deere X595 antifreeze guidance is The recommended coolant for the John Deere X595 tractor is John Deere Cool-Gard II, which. Check the coolant label before mixing concentrate and water
Should I run the John Deere X595 after adding coolant?
After refilling the John Deere X595, run the engine to operating temperature, let it cool and recheck the radiator or overflow level. Air pockets can make the level drop
When is a full coolant flush better than a top-up on the John Deere X595?
A top-up is only a level correction. A flush is the better choice if the John Deere X595 has rusty coolant, oil contamination, mixed coolant types or repeated overheating
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
