The John Deere X585 takes 1.13 gal (4.3 L) of coolant. Use coolant compatible with John Deere Cool-Gard II and follow the listed The recommended coolant for the John Deere X585 tractor is John Deere Cool-Gard II, which guidance.
Coolant capacity1.13 gal (4.3 L)Cooling system refill amount
Antifreeze mixThe recommended coolant for the John Deere X585 tractor is John Deere Cool-Gard II, whichFreeze/boil protection
John Deere X585 Coolant Capacity Specs
Coolant capacity
1.13 gal (4.3 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
The recommended coolant for the John Deere X585 tractor is John Deere Cool-Gard II, which
Engine horsepower
25 hp
Engine displacement
45.5 cu in (0.75 L)
John Deere X585 Coolant Capacity Guide
Coolant capacity guide
This model
1.13 gal
Class low
0.5 gal
Class typical
2.5 gal
Class high
4.5 gal
Compared with a broad ztrak / mower guide, not the full tractor dataset.
John Deere X585 Coolant Service Notes
Coolant capacity note
For the John Deere X585, the coolant capacity is 1.13 gal (4.3 L). That is the buying and refill guide for a full cooling-system service
Coolant service note
The John Deere X585 cooling system should be refilled close to 1.13 gal (4.3 L), with coolant choice guided by John Deere Cool-Gard II and The recommended coolant for the John Deere X585 tractor is John Deere Cool-Gard II, which
Coolant type note
Coolant type matters on the John Deere X585. The listed type is John Deere Cool-Gard II, so avoid mixing random antifreeze unless compatibility is clear
Antifreeze mix note
For the John Deere X585, the antifreeze mix is listed as The recommended coolant for the John Deere X585 tractor is John Deere Cool-Gard II, which. Use the correct mix rather than topping up repeatedly with plain water
Refill check
Use the 1.13 gal (4.3 L) capacity to buy enough coolant for the John Deere X585, but finish the job by checking the actual level marks
Engine context
The John Deere X585 engine specs listed with this page are engine horsepower 25 hp and engine displacement 45.5 cu in (0.75 L). They help identify the machine, but they are not a substitute for the coolant capacity
John Deere X585 Coolant Capacity FAQ
How many litres of coolant does the John Deere X585 take?
Use 1.13 gal (4.3 L) as the coolant-change amount for the John Deere X585. The final level should still be checked at the radiator or overflow bottle
What coolant chemistry should the John Deere X585 use?
Use coolant compatible with John Deere Cool-Gard II for the John Deere X585. Capacity tells you how much; coolant type tells you what to use
What antifreeze ratio is listed for the John Deere X585?
For the John Deere X585, the coolant mix is listed as The recommended coolant for the John Deere X585 tractor is John Deere Cool-Gard II, which. Do not dilute the system with too much plain water
How do I avoid air pockets when refilling the John Deere X585 coolant?
The 1.13 gal (4.3 L) number helps you plan the refill. The actual finish point is the correct level mark after warm-up, cool-down and leak checking
Should old coolant be drained from the John Deere X585?
For the John Deere X585, use the 1.13 gal (4.3 L) capacity when planning a full drain or flush. Topping up only solves low level, not worn-out coolant
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
