Antifreeze mix40/60 coolant and water mixFreeze/boil protection
John Deere X146R Coolant Capacity Specs
Coolant capacity
0.5 gal (1.9 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
40/60 coolant and water mix
Engine model
John Deere X146R tractor features a Briggs
Engine horsepower
16.8 hp
Engine displacement
40 cu in (0.66 L)
John Deere X146R Coolant Capacity Guide
Coolant capacity guide
This model
0.5 gal
Class low
0.5 gal
Class typical
2.5 gal
Class high
4.5 gal
Compared with a broad ztrak / mower guide, not the full tractor dataset.
John Deere X146R Coolant Service Notes
Coolant capacity note
For the John Deere X146R, the coolant capacity is 0.5 gal (1.9 L). That is the buying and refill guide for a full cooling-system service
Coolant service note
Use 0.5 gal (1.9 L) as the refill amount for the John Deere X146R, but do not mix coolant types blindly. The listed coolant detail is John Deere Cool-Gard II and 40/60 coolant and water mix
Coolant type note
The listed coolant type for the John Deere X146R is John Deere Cool-Gard II. Match the coolant chemistry before topping up or flushing the system
Antifreeze mix note
The listed antifreeze mix for the John Deere X146R is 40/60 coolant and water mix. Mix ratio affects freeze protection, boil protection and corrosion control
Refill check
When refilling the John Deere X146R, do not pour in 0.5 gal (1.9 L) and walk away. Fill slowly, run the engine, let it cool and recheck the level
Engine context
The John Deere X146R engine specs listed with this page are engine model John Deere X146R tractor features a Briggs, engine horsepower 16.8 hp, and engine displacement 40 cu in (0.66 L). They help identify the machine, but they are not a substitute for the coolant capacity
John Deere X146R Coolant Capacity FAQ
What is the John Deere X146R coolant capacity?
The John Deere X146R coolant capacity is 0.5 gal (1.9 L). Use this as the cooling-system refill amount and recheck the level after warm-up and cool-down
Which coolant is listed for the John Deere X146R?
Use John Deere Cool-Gard II or a coolant that clearly meets the same requirement for the John Deere X146R. Do not rely on color alone because coolant color is not a perfect chemistry guide
Does the John Deere X146R need a 50/50 coolant mix?
The John Deere X146R coolant mix guidance is 40/60 coolant and water mix. Keep the mix consistent when topping up so freeze and boil protection stay in range
What should I check after refilling coolant in the John Deere X146R?
The John Deere X146R may need a small top-up after the first heat cycle. Fill slowly, watch for leaks and recheck the level when cool
Is a coolant top-up enough before using the John Deere X146R?
Use a full coolant service on the John Deere X146R when the system needs fresh coolant, not just more coolant. Plan the refill around the 0.5 gal (1.9 L) capacity
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
