For the John Deere X107, coolant capacity is 14 gal (53 L). Coolant choice is listed as John Deere Cool-Gard II, with The recommended coolant for the John Deere X107 tractor is John Deere Cool-Gard II, which guidance.
Coolant capacity14 gal (53 L)Cooling system refill amount
Antifreeze mixThe recommended coolant for the John Deere X107 tractor is John Deere Cool-Gard II, whichFreeze/boil protection
John Deere X107 Coolant Capacity Specs
Coolant capacity
14 gal (53 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
The recommended coolant for the John Deere X107 tractor is John Deere Cool-Gard II, which
Engine model
John Deere X107 tractor features an 11.1 kW
Engine horsepower
15 hp
Engine displacement
30.5 cu in (0.5 L)
John Deere X107 Coolant Capacity Guide
Coolant capacity guide
This model
14 gal
Class low
0.5 gal
Class typical
2.5 gal
Class high
4.5 gal
Compared with a broad ztrak / mower guide, not the full tractor dataset.
John Deere X107 Coolant Service Notes
Coolant capacity note
For the John Deere X107, the coolant capacity is 14 gal (53 L). That is the buying and refill guide for a full cooling-system service
Coolant service note
For a full coolant service on the John Deere X107, plan around 14 gal (53 L) and match the listed coolant guidance: John Deere Cool-Gard II and The recommended coolant for the John Deere X107 tractor is John Deere Cool-Gard II, which
Coolant type note
The John Deere X107 coolant type is John Deere Cool-Gard II. Wrong coolant chemistry can reduce corrosion, freeze and boil protection
Antifreeze mix note
The listed mix for the John Deere X107 is The recommended coolant for the John Deere X107 tractor is John Deere Cool-Gard II, which. Keep the coolant strength in range after a drain, flush or top-up
Refill check
After a drain and refill on the John Deere X107, the cooling system can burp air. Recheck the level after the first warm-up and cool-down cycle
Engine context
For comparison, the John Deere X107 engine details listed here are engine model John Deere X107 tractor features an 11.1 kW, engine horsepower 15 hp, and engine displacement 30.5 cu in (0.5 L). The coolant capacity remains the service number to use for refilling
John Deere X107 Coolant Capacity FAQ
How many litres of coolant does the John Deere X107 take?
The cooling system capacity for the John Deere X107 is 14 gal (53 L). This is the main refill figure for a drain, flush or coolant change
What coolant chemistry should the John Deere X107 use?
For the John Deere X107, the coolant type is listed as John Deere Cool-Gard II. Avoid mixing incompatible coolant products
What mix ratio should I use when refilling the John Deere X107?
If using concentrate for the John Deere X107, mix it to The recommended coolant for the John Deere X107 tractor is John Deere Cool-Gard II, which before filling unless the product label says it is already premixed
How do I avoid air pockets when refilling the John Deere X107 coolant?
Fill the John Deere X107 slowly, run it with the heater/thermostat cycle where applicable, let it cool and check the level again. That helps catch trapped air
Should old coolant be drained from the John Deere X107?
Flush the John Deere X107 cooling system if the coolant is dirty, contaminated, badly diluted or overdue for service. A simple top-up does not fix old coolant chemistry
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
