The listed coolant capacity for the John Deere X106 is 0.63 gal (2.4 L). Keep a little extra coolant available for final top-up after air leaves the system.
Coolant capacity0.63 gal (2.4 L)Cooling system refill amount
John Deere X106 Coolant Capacity Specs
Coolant capacity
0.63 gal (2.4 L)
Engine model
John Deere X106 tractor features a Briggs
Engine horsepower
10.2 hp
Engine displacement
20.7 cu in (0.34 L)
John Deere X106 Coolant Capacity Guide
Coolant capacity guide
This model
0.63 gal
Class low
0.5 gal
Class typical
2.5 gal
Class high
4.5 gal
Compared with a broad ztrak / mower guide, not the full tractor dataset.
John Deere X106 Coolant Service Notes
Coolant capacity note
The main coolant number for the John Deere X106 is 0.63 gal (2.4 L). Use it as the cooling-system refill amount, then check the radiator or overflow level after the engine has warmed up and cooled down
Coolant service note
After refilling the John Deere X106, run it to operating temperature and recheck after cool-down. Air pockets can make the level drop
Refill check
For the John Deere X106, 0.63 gal (2.4 L) is the planned refill amount. The final level may need a small top-up after trapped air leaves the system
Engine context
The engine context for the John Deere X106 is engine model John Deere X106 tractor features a Briggs, engine horsepower 10.2 hp, and engine displacement 20.7 cu in (0.34 L). Use this for comparison only; the refill amount is the coolant capacity above
John Deere X106 Coolant Capacity FAQ
How many gallons of coolant does the John Deere X106 hold?
For coolant service, the John Deere X106 is listed at 0.63 gal (2.4 L). Buy enough coolant for that amount and confirm the final level at the machine
Why does coolant level drop after changing coolant in the John Deere X106?
Do not judge the job only by pouring in 0.63 gal (2.4 L). The final check is the actual radiator or overflow level after the system has burped air
Is topping up enough for the John Deere X106 cooling system?
Topping up is fine for a small low-level correction. If the coolant is old, rusty, oily, diluted or the wrong type, drain and flush the system using the 0.63 gal (2.4 L) capacity as the refill guide
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
