For the John Deere LX255, coolant capacity is 9.51 gal (36 L). Fill slowly and recheck the radiator or overflow level after the first heat cycle.
Coolant capacity9.51 gal (36 L)Cooling system refill amount
John Deere LX255 Coolant Capacity Specs
Coolant capacity
9.51 gal (36 L)
John Deere LX255 Coolant Capacity Guide
Coolant capacity guide
This model
9.51 gal
Class low
0.8 gal
Class typical
2.5 gal
Class high
5 gal
Compared with a broad older small tractor guide, not the full tractor dataset.
John Deere LX255 Coolant Service Notes
Coolant capacity note
For the John Deere LX255, the coolant capacity is 9.51 gal (36 L). That is the buying and refill guide for a full cooling-system service
Coolant service note
The John Deere LX255 should be filled by capacity first, then verified by the actual level marks after the engine cools
Refill check
After a drain and refill on the John Deere LX255, the cooling system can burp air. Recheck the level after the first warm-up and cool-down cycle
John Deere LX255 Coolant Capacity FAQ
How many litres of coolant does the John Deere LX255 take?
The cooling system capacity for the John Deere LX255 is 9.51 gal (36 L). This is the main refill figure for a drain, flush or coolant change
How do I avoid air pockets when refilling the John Deere LX255 coolant?
Fill the John Deere LX255 slowly, run it with the heater/thermostat cycle where applicable, let it cool and check the level again. That helps catch trapped air
Should old coolant be drained from the John Deere LX255?
Flush the John Deere LX255 cooling system if the coolant is dirty, contaminated, badly diluted or overdue for service. A simple top-up does not fix old coolant chemistry
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
