For the John Deere L118, coolant capacity is 9.51 gal (36 L). Fill slowly and recheck the radiator or overflow level after the first heat cycle.
John Deere L118 Coolant Capacity Specs
| Coolant capacity | 9.51 gal (36 L) |
|---|---|
| Engine horsepower | 17.5 hp |
| Engine displacement | 29.9 cu in (0.49 L) |
John Deere L118 Coolant Capacity Guide
Coolant capacity guide
Compared with a broad older small tractor guide, not the full tractor dataset.
John Deere L118 Coolant Service Notes
| Coolant capacity note | For the John Deere L118, the coolant capacity is 9.51 gal (36 L). That is the buying and refill guide for a full cooling-system service |
|---|---|
| Coolant service note | Use 9.51 gal (36 L) as the refill guide for the John Deere L118. The final level should still be confirmed at the radiator or overflow bottle |
| Refill check | Use the 9.51 gal (36 L) capacity to buy enough coolant for the John Deere L118, but finish the job by checking the actual level marks |
| Engine context | The engine context for the John Deere L118 is engine horsepower 17.5 hp and engine displacement 29.9 cu in (0.49 L). Use this for comparison only; the refill amount is the coolant capacity above |
John Deere L118 Coolant Capacity FAQ
How many litres of coolant does the John Deere L118 take?
The John Deere L118 takes 9.51 gal (36 L) of coolant. Final level can settle after trapped air leaves the cooling system
How do I avoid air pockets when refilling the John Deere L118 coolant?
After a coolant change on the John Deere L118, check for leaks, watch temperature and recheck the level once the engine cools down
Should old coolant be drained from the John Deere L118?
Low level, bad smell, rust, sludge, oil film or overheating are signs to inspect the John Deere L118 cooling system rather than only topping it up
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.






