The John Deere F525 takes 9.51 gal (36 L) of coolant. Use coolant compatible with John Deere Cool-Gard II and follow the listed 40/60 coolant and water mix guidance.
Coolant capacity9.51 gal (36 L)Cooling system refill amount
Antifreeze mix40/60 coolant and water mixFreeze/boil protection
John Deere F525 Coolant Capacity Specs
Coolant capacity
9.51 gal (36 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
40/60 coolant and water mix
Engine horsepower
17 hp
John Deere F525 Coolant Capacity Guide
Coolant capacity guide
This model
9.51 gal
Class low
0.8 gal
Class typical
2.5 gal
Class high
5 gal
Compared with a broad older small tractor guide, not the full tractor dataset.
John Deere F525 Coolant Service Notes
Coolant capacity note
The John Deere F525 cooling system is listed at 9.51 gal (36 L). Final level can settle after the first heat cycle, so recheck the level after service
Coolant service note
The John Deere F525 cooling system should be refilled close to 9.51 gal (36 L), with coolant choice guided by John Deere Cool-Gard II and 40/60 coolant and water mix
Coolant type note
Coolant type matters on the John Deere F525. The listed type is John Deere Cool-Gard II, so avoid mixing random antifreeze unless compatibility is clear
Antifreeze mix note
For the John Deere F525, the antifreeze mix is listed as 40/60 coolant and water mix. Use the correct mix rather than topping up repeatedly with plain water
Refill check
Use the 9.51 gal (36 L) capacity to buy enough coolant for the John Deere F525, but finish the job by checking the actual level marks
Engine context
The John Deere F525 engine specs listed with this page are engine horsepower 17 hp. They help identify the machine, but they are not a substitute for the coolant capacity
John Deere F525 Coolant Capacity FAQ
How much coolant does the John Deere F525 take?
Use 9.51 gal (36 L) as the coolant-change amount for the John Deere F525. The final level should still be checked at the radiator or overflow bottle
Does the John Deere F525 use John Deere Cool-Gard coolant?
Use coolant compatible with John Deere Cool-Gard II for the John Deere F525. Capacity tells you how much; coolant type tells you what to use
What antifreeze ratio is listed for the John Deere F525?
If using concentrate for the John Deere F525, mix it to 40/60 coolant and water mix before filling unless the product label says it is already premixed
Do I need to recheck coolant level after servicing the John Deere F525?
The 9.51 gal (36 L) number helps you plan the refill. The actual finish point is the correct level mark after warm-up, cool-down and leak checking
When should contaminated coolant be replaced in the John Deere F525?
For the John Deere F525, use the 9.51 gal (36 L) capacity when planning a full drain or flush. Topping up only solves low level, not worn-out coolant
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
