The John Deere 9560RT takes 14 gal (53 L) of coolant. Use coolant compatible with John Deere Cool-Gard II and follow the listed 50/50 coolant and water mix guidance.
Coolant capacity14 gal (53 L)Cooling system refill amount
Antifreeze mix50/50 coolant and water mixFreeze/boil protection
John Deere 9560RT Coolant Capacity Specs
Coolant capacity
14 gal (53 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
50/50 coolant and water mix
Engine horsepower
560 hp
Engine displacement
823.8 cu in (13.5 L)
John Deere 9560RT Coolant Capacity Guide
Coolant capacity guide
This model
14 gal
Class low
15 gal
Class typical
28 gal
Class high
45 gal
Compared with a broad 9 series guide, not the full tractor dataset.
John Deere 9560RT Coolant Service Notes
Coolant capacity note
The John Deere 9560RT coolant capacity is 14 gal (53 L). Treat it as a cooling-system amount, not a radiator-only top-up amount
Coolant service note
The John Deere 9560RT cooling system should be refilled close to 14 gal (53 L), with coolant choice guided by John Deere Cool-Gard II and 50/50 coolant and water mix
Coolant type note
Coolant type matters on the John Deere 9560RT. The listed type is John Deere Cool-Gard II, so avoid mixing random antifreeze unless compatibility is clear
Antifreeze mix note
For the John Deere 9560RT, the antifreeze mix is listed as 50/50 coolant and water mix. Use the correct mix rather than topping up repeatedly with plain water
Refill check
Use the 14 gal (53 L) capacity to buy enough coolant for the John Deere 9560RT, but finish the job by checking the actual level marks
Engine context
For comparison, the John Deere 9560RT engine details listed here are engine horsepower 560 hp and engine displacement 823.8 cu in (13.5 L). The coolant capacity remains the service number to use for refilling
John Deere 9560RT Coolant Capacity FAQ
How much coolant is needed for a John Deere 9560RT coolant change?
Use 14 gal (53 L) as the coolant-change amount for the John Deere 9560RT. The final level should still be checked at the radiator or overflow bottle
Can I use John Deere Cool-Gard in the John Deere 9560RT?
Use coolant compatible with John Deere Cool-Gard II for the John Deere 9560RT. Capacity tells you how much; coolant type tells you what to use
What antifreeze ratio is listed for the John Deere 9560RT?
The John Deere 9560RT uses 50/50 coolant and water mix where that mix is specified. Confirm the mix against your climate and manual
Should I bleed air after changing coolant in the John Deere 9560RT?
The 14 gal (53 L) number helps you plan the refill. The actual finish point is the correct level mark after warm-up, cool-down and leak checking
When should I flush the John Deere 9560RT cooling system?
For the John Deere 9560RT, use the 14 gal (53 L) capacity when planning a full drain or flush. Topping up only solves low level, not worn-out coolant
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
