Coolant capacity for the John Deere 8560 is 12 gal (45.4 L). The coolant type is listed as John Deere Cool-Gard II, and the antifreeze mix is 40/60 coolant and water mix.
Coolant capacity12 gal (45.4 L)Cooling system refill amount
Antifreeze mix40/60 coolant and water mixFreeze/boil protection
John Deere 8560 Coolant Capacity Specs
Coolant capacity
12 gal (45.4 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
40/60 coolant and water mix
Engine horsepower
210.2 hp
Engine displacement
466 cu in (7.64 L)
John Deere 8560 Coolant Capacity Guide
Coolant capacity guide
This model
12 gal
Class low
10 gal
Class typical
16 gal
Class high
24 gal
Compared with a broad 8 series guide, not the full tractor dataset.
John Deere 8560 Coolant Service Notes
Coolant capacity note
The John Deere 8560 cooling system is listed at 12 gal (45.4 L). Final level can settle after the first heat cycle, so recheck the level after service
Coolant service note
A proper coolant change on the John Deere 8560 means using the 12 gal (45.4 L) capacity and keeping the coolant chemistry consistent with John Deere Cool-Gard II and 40/60 coolant and water mix
Coolant type note
For the John Deere 8560, coolant choice is listed as John Deere Cool-Gard II. Capacity tells you how much; coolant type tells you what to use
Antifreeze mix note
The John Deere 8560 coolant mix guidance is 40/60 coolant and water mix. This matters most in freezing weather, hot work and long service intervals
Refill check
For the John Deere 8560, 12 gal (45.4 L) is the planned refill amount. The final level may need a small top-up after trapped air leaves the system
Engine context
The John Deere 8560 engine specs listed with this page are engine horsepower 210.2 hp and engine displacement 466 cu in (7.64 L). They help identify the machine, but they are not a substitute for the coolant capacity
John Deere 8560 Coolant Capacity FAQ
What is the refill amount for the John Deere 8560 cooling system?
The listed coolant amount for the John Deere 8560 is 12 gal (45.4 L). It is a refill guide, not a reason to ignore the actual level marks
What should I match when topping up coolant in the John Deere 8560?
The John Deere 8560 is listed with John Deere Cool-Gard II coolant guidance. If topping up, match the existing coolant type instead of mixing random antifreeze
What antifreeze mix should the John Deere 8560 use?
Use the listed 40/60 coolant and water mix mix when refilling the John Deere 8560. Too much water weakens protection; too much concentrate can also reduce cooling performance
Should I run the John Deere 8560 after adding coolant?
After refilling the John Deere 8560, run the engine to operating temperature, let it cool and recheck the radiator or overflow level. Air pockets can make the level drop
When is a full coolant flush better than a top-up on the John Deere 8560?
A top-up is only a level correction. A flush is the better choice if the John Deere 8560 has rusty coolant, oil contamination, mixed coolant types or repeated overheating
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
