Coolant capacity for the John Deere 8360R is 10.9 gal (41.3 L). The coolant type is listed as John Deere Cool-Gard II, and the antifreeze mix is The recommended coolant type for the John Deere 8360R tractor is John Deere Cool-Gard II.
Coolant capacity10.9 gal (41.3 L)Cooling system refill amount
Antifreeze mixThe recommended coolant type for the John Deere 8360R tractor is John Deere Cool-Gard IIFreeze/boil protection
John Deere 8360R Coolant Capacity Specs
Coolant capacity
10.9 gal (41.3 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
The recommended coolant type for the John Deere 8360R tractor is John Deere Cool-Gard II
Engine horsepower
396 hp
Engine displacement
548 cu in (9 L)
John Deere 8360R Coolant Capacity Guide
Coolant capacity guide
This model
10.91 gal
Class low
10 gal
Class typical
16 gal
Class high
24 gal
Compared with a broad 8 series guide, not the full tractor dataset.
John Deere 8360R Coolant Service Notes
Coolant capacity note
The John Deere 8360R cooling system is listed at 10.9 gal (41.3 L). Final level can settle after the first heat cycle, so recheck the level after service
Coolant service note
A proper coolant change on the John Deere 8360R means using the 10.9 gal (41.3 L) capacity and keeping the coolant chemistry consistent with John Deere Cool-Gard II and The recommended coolant type for the John Deere 8360R tractor is John Deere Cool-Gard II
Coolant type note
For the John Deere 8360R, coolant choice is listed as John Deere Cool-Gard II. Capacity tells you how much; coolant type tells you what to use
Antifreeze mix note
The John Deere 8360R coolant mix guidance is The recommended coolant type for the John Deere 8360R tractor is John Deere Cool-Gard II. This matters most in freezing weather, hot work and long service intervals
Refill check
For the John Deere 8360R, 10.9 gal (41.3 L) is the planned refill amount. The final level may need a small top-up after trapped air leaves the system
Engine context
For comparison, the John Deere 8360R engine details listed here are engine horsepower 396 hp and engine displacement 548 cu in (9 L). The coolant capacity remains the service number to use for refilling
John Deere 8360R Coolant Capacity FAQ
What is the refill amount for the John Deere 8360R cooling system?
The listed coolant amount for the John Deere 8360R is 10.9 gal (41.3 L). It is a refill guide, not a reason to ignore the actual level marks
What should I match when topping up coolant in the John Deere 8360R?
The John Deere 8360R is listed with John Deere Cool-Gard II coolant guidance. If topping up, match the existing coolant type instead of mixing random antifreeze
What antifreeze mix should the John Deere 8360R use?
The listed antifreeze mix for the John Deere 8360R is The recommended coolant type for the John Deere 8360R tractor is John Deere Cool-Gard II. Use the correct mix for freeze, boil and corrosion protection
Should I run the John Deere 8360R after adding coolant?
After refilling the John Deere 8360R, run the engine to operating temperature, let it cool and recheck the radiator or overflow level. Air pockets can make the level drop
When is a full coolant flush better than a top-up on the John Deere 8360R?
A top-up is only a level correction. A flush is the better choice if the John Deere 8360R has rusty coolant, oil contamination, mixed coolant types or repeated overheating
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
