The John Deere 8295RT takes 10.57 gal (40 L) of coolant. Use coolant compatible with John Deere Cool-Gard II and follow the listed The recommended coolant type for the John Deere 8295RT tractor is John Deere Cool-Gard guidance.
Coolant capacity10.57 gal (40 L)Cooling system refill amount
Antifreeze mixThe recommended coolant type for the John Deere 8295RT tractor is John Deere Cool-GardFreeze/boil protection
John Deere 8295RT Coolant Capacity Specs
Coolant capacity
10.57 gal (40 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
The recommended coolant type for the John Deere 8295RT tractor is John Deere Cool-Gard
Engine horsepower
284 hp
Engine displacement
548 cu in (9 L)
John Deere 8295RT Coolant Capacity Guide
Coolant capacity guide
This model
10.57 gal
Class low
10 gal
Class typical
16 gal
Class high
24 gal
Compared with a broad 8 series guide, not the full tractor dataset.
John Deere 8295RT Coolant Service Notes
Coolant capacity note
The useful service number here is 10.57 gal (40 L). Keep some extra coolant available because trapped air can lower the level after the first warm-up
Coolant service note
The John Deere 8295RT cooling system should be refilled close to 10.57 gal (40 L), with coolant choice guided by John Deere Cool-Gard II and The recommended coolant type for the John Deere 8295RT tractor is John Deere Cool-Gard
Coolant type note
Coolant type matters on the John Deere 8295RT. The listed type is John Deere Cool-Gard II, so avoid mixing random antifreeze unless compatibility is clear
Antifreeze mix note
For the John Deere 8295RT, the antifreeze mix is listed as The recommended coolant type for the John Deere 8295RT tractor is John Deere Cool-Gard. Use the correct mix rather than topping up repeatedly with plain water
Refill check
Use the 10.57 gal (40 L) capacity to buy enough coolant for the John Deere 8295RT, but finish the job by checking the actual level marks
Engine context
The John Deere 8295RT engine specs listed with this page are engine horsepower 284 hp and engine displacement 548 cu in (9 L). They help identify the machine, but they are not a substitute for the coolant capacity
John Deere 8295RT Coolant Capacity FAQ
How much coolant should I buy for the John Deere 8295RT?
The John Deere 8295RT takes 10.57 gal (40 L) of coolant. Final level can settle after trapped air leaves the cooling system
Is John Deere Cool-Gard II listed for the John Deere 8295RT?
The John Deere 8295RT coolant spec points to John Deere Cool-Gard II. That matters because the wrong coolant can reduce corrosion and cavitation protection
What coolant and water mix is used in the John Deere 8295RT?
The listed antifreeze mix for the John Deere 8295RT is The recommended coolant type for the John Deere 8295RT tractor is John Deere Cool-Gard. Use the correct mix for freeze, boil and corrosion protection
Do I fill the John Deere 8295RT exactly to capacity or check the level marks?
After a coolant change on the John Deere 8295RT, check for leaks, watch temperature and recheck the level once the engine cools down
Can I just add coolant to the John Deere 8295RT if the level is low?
Low level, bad smell, rust, sludge, oil film or overheating are signs to inspect the John Deere 8295RT cooling system rather than only topping it up
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
