The John Deere 7425 takes 14.48 gal (54.8 L) of coolant. Use coolant compatible with John Deere Cool-Gard II and follow the listed The recommended coolant for the John Deere 7425 tractor is John Deere COOL-GARD II, which guidance.
Coolant capacity14.48 gal (54.8 L)Cooling system refill amount
Antifreeze mixThe recommended coolant for the John Deere 7425 tractor is John Deere COOL-GARD II, whichFreeze/boil protection
John Deere 7425 Coolant Capacity Specs
Coolant capacity
14.48 gal (54.8 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
The recommended coolant for the John Deere 7425 tractor is John Deere COOL-GARD II, which
Engine horsepower
138 hp
Engine displacement
414 cu in (6.78 L)
John Deere 7425 Coolant Capacity Guide
Coolant capacity guide
This model
14.48 gal
Class low
8 gal
Class typical
13 gal
Class high
18 gal
Compared with a broad 7 series guide, not the full tractor dataset.
John Deere 7425 Coolant Service Notes
Coolant capacity note
For the John Deere 7425, the coolant capacity is 14.48 gal (54.8 L). That is the buying and refill guide for a full cooling-system service
Coolant service note
The John Deere 7425 cooling system should be refilled close to 14.48 gal (54.8 L), with coolant choice guided by John Deere Cool-Gard II and The recommended coolant for the John Deere 7425 tractor is John Deere COOL-GARD II, which
Coolant type note
Coolant type matters on the John Deere 7425. The listed type is John Deere Cool-Gard II, so avoid mixing random antifreeze unless compatibility is clear
Antifreeze mix note
For the John Deere 7425, the antifreeze mix is listed as The recommended coolant for the John Deere 7425 tractor is John Deere COOL-GARD II, which. Use the correct mix rather than topping up repeatedly with plain water
Refill check
Use the 14.48 gal (54.8 L) capacity to buy enough coolant for the John Deere 7425, but finish the job by checking the actual level marks
Engine context
For comparison, the John Deere 7425 engine details listed here are engine horsepower 138 hp and engine displacement 414 cu in (6.78 L). The coolant capacity remains the service number to use for refilling
John Deere 7425 Coolant Capacity FAQ
How many litres of coolant does the John Deere 7425 take?
Use 14.48 gal (54.8 L) as the coolant-change amount for the John Deere 7425. The final level should still be checked at the radiator or overflow bottle
What coolant chemistry should the John Deere 7425 use?
Use coolant compatible with John Deere Cool-Gard II for the John Deere 7425. Capacity tells you how much; coolant type tells you what to use
What antifreeze ratio is listed for the John Deere 7425?
The John Deere 7425 uses The recommended coolant for the John Deere 7425 tractor is John Deere COOL-GARD II, which where that mix is specified. Confirm the mix against your climate and manual
How do I avoid air pockets when refilling the John Deere 7425 coolant?
The 14.48 gal (54.8 L) number helps you plan the refill. The actual finish point is the correct level mark after warm-up, cool-down and leak checking
Should old coolant be drained from the John Deere 7425?
For the John Deere 7425, use the 14.48 gal (54.8 L) capacity when planning a full drain or flush. Topping up only solves low level, not worn-out coolant
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
