The John Deere 7225J takes 9.51 gal (36 L) of coolant. Use coolant compatible with John Deere Cool-Gard II and follow the listed 40/60 coolant and water mix guidance.
Coolant capacity9.51 gal (36 L)Cooling system refill amount
Antifreeze mix40/60 coolant and water mixFreeze/boil protection
John Deere 7225J Coolant Capacity Specs
Coolant capacity
9.51 gal (36 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
40/60 coolant and water mix
Engine horsepower
225 hp
Engine displacement
414 cu in (6.78 L)
John Deere 7225J Coolant Capacity Guide
Coolant capacity guide
This model
9.51 gal
Class low
8 gal
Class typical
13 gal
Class high
18 gal
Compared with a broad 7 series guide, not the full tractor dataset.
John Deere 7225J Coolant Service Notes
Coolant capacity note
The useful service number here is 9.51 gal (36 L). Keep some extra coolant available because trapped air can lower the level after the first warm-up
Coolant service note
The John Deere 7225J cooling system should be refilled close to 9.51 gal (36 L), with coolant choice guided by John Deere Cool-Gard II and 40/60 coolant and water mix
Coolant type note
Coolant type matters on the John Deere 7225J. The listed type is John Deere Cool-Gard II, so avoid mixing random antifreeze unless compatibility is clear
Antifreeze mix note
For the John Deere 7225J, the antifreeze mix is listed as 40/60 coolant and water mix. Use the correct mix rather than topping up repeatedly with plain water
Refill check
Use the 9.51 gal (36 L) capacity to buy enough coolant for the John Deere 7225J, but finish the job by checking the actual level marks
Engine context
For comparison, the John Deere 7225J engine details listed here are engine horsepower 225 hp and engine displacement 414 cu in (6.78 L). The coolant capacity remains the service number to use for refilling
John Deere 7225J Coolant Capacity FAQ
How much coolant should I buy for the John Deere 7225J?
Use 9.51 gal (36 L) as the coolant-change amount for the John Deere 7225J. The final level should still be checked at the radiator or overflow bottle
Is John Deere Cool-Gard II listed for the John Deere 7225J?
Use coolant compatible with John Deere Cool-Gard II for the John Deere 7225J. Capacity tells you how much; coolant type tells you what to use
What antifreeze ratio is listed for the John Deere 7225J?
If using concentrate for the John Deere 7225J, mix it to 40/60 coolant and water mix before filling unless the product label says it is already premixed
Do I fill the John Deere 7225J exactly to capacity or check the level marks?
The 9.51 gal (36 L) number helps you plan the refill. The actual finish point is the correct level mark after warm-up, cool-down and leak checking
Can I just add coolant to the John Deere 7225J if the level is low?
For the John Deere 7225J, use the 9.51 gal (36 L) capacity when planning a full drain or flush. Topping up only solves low level, not worn-out coolant
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
