The John Deere 6525 takes 14.24 gal (53.9 L) of coolant. Use coolant compatible with John Deere Cool-Gard II and follow the listed 40/60 coolant and water mix guidance.
John Deere 6525 Coolant Capacity Specs
| Coolant capacity | 14.24 gal (53.9 L) |
|---|---|
| Coolant type | John Deere Cool-Gard II |
| Antifreeze mix | 40/60 coolant and water mix |
John Deere 6525 Coolant Capacity Guide
Coolant capacity guide
Compared with a broad 6 series guide, not the full tractor dataset.
John Deere 6525 Coolant Service Notes
| Coolant capacity note | For the John Deere 6525, the coolant capacity is 14.24 gal (53.9 L). That is the buying and refill guide for a full cooling-system service |
|---|---|
| Coolant service note | The John Deere 6525 cooling system should be refilled close to 14.24 gal (53.9 L), with coolant choice guided by John Deere Cool-Gard II and 40/60 coolant and water mix |
| Coolant type note | Coolant type matters on the John Deere 6525. The listed type is John Deere Cool-Gard II, so avoid mixing random antifreeze unless compatibility is clear |
| Antifreeze mix note | For the John Deere 6525, the antifreeze mix is listed as 40/60 coolant and water mix. Use the correct mix rather than topping up repeatedly with plain water |
| Refill check | Use the 14.24 gal (53.9 L) capacity to buy enough coolant for the John Deere 6525, but finish the job by checking the actual level marks |
John Deere 6525 Coolant Capacity FAQ
How many litres of coolant does the John Deere 6525 take?
Use 14.24 gal (53.9 L) as the coolant-change amount for the John Deere 6525. The final level should still be checked at the radiator or overflow bottle
What coolant chemistry should the John Deere 6525 use?
Use coolant compatible with John Deere Cool-Gard II for the John Deere 6525. Capacity tells you how much; coolant type tells you what to use
What antifreeze ratio is listed for the John Deere 6525?
The John Deere 6525 uses 40/60 coolant and water mix where that mix is specified. Confirm the mix against your climate and manual
How do I avoid air pockets when refilling the John Deere 6525 coolant?
The 14.24 gal (53.9 L) number helps you plan the refill. The actual finish point is the correct level mark after warm-up, cool-down and leak checking
Should old coolant be drained from the John Deere 6525?
For the John Deere 6525, use the 14.24 gal (53.9 L) capacity when planning a full drain or flush. Topping up only solves low level, not worn-out coolant
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
