Coolant capacity for the John Deere 6250R is 12.49 gal (47.3 L). The coolant type is listed as John Deere Cool-Gard II, and the antifreeze mix is The recommended coolant for the John Deere 6250R tractor is John Deere Cool-Gard II.
Coolant capacity12.49 gal (47.3 L)Cooling system refill amount
Antifreeze mixThe recommended coolant for the John Deere 6250R tractor is John Deere Cool-Gard IIFreeze/boil protection
John Deere 6250R Coolant Capacity Specs
Coolant capacity
12.49 gal (47.3 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
The recommended coolant for the John Deere 6250R tractor is John Deere Cool-Gard II
Engine horsepower
250 hp
Engine displacement
415 cu in (6.8 L)
John Deere 6250R Coolant Capacity Guide
Coolant capacity guide
This model
12.49 gal
Class low
6 gal
Class typical
9.5 gal
Class high
14 gal
Compared with a broad 6 series guide, not the full tractor dataset.
John Deere 6250R Coolant Service Notes
Coolant capacity note
The useful service number here is 12.49 gal (47.3 L). Keep some extra coolant available because trapped air can lower the level after the first warm-up
Coolant service note
A proper coolant change on the John Deere 6250R means using the 12.49 gal (47.3 L) capacity and keeping the coolant chemistry consistent with John Deere Cool-Gard II and The recommended coolant for the John Deere 6250R tractor is John Deere Cool-Gard II
Coolant type note
For the John Deere 6250R, coolant choice is listed as John Deere Cool-Gard II. Capacity tells you how much; coolant type tells you what to use
Antifreeze mix note
The John Deere 6250R coolant mix guidance is The recommended coolant for the John Deere 6250R tractor is John Deere Cool-Gard II. This matters most in freezing weather, hot work and long service intervals
Refill check
For the John Deere 6250R, 12.49 gal (47.3 L) is the planned refill amount. The final level may need a small top-up after trapped air leaves the system
Engine context
The engine context for the John Deere 6250R is engine horsepower 250 hp and engine displacement 415 cu in (6.8 L). Use this for comparison only; the refill amount is the coolant capacity above
John Deere 6250R Coolant Capacity FAQ
What is the John Deere 6250R cooling system capacity?
For coolant service, the John Deere 6250R is listed at 12.49 gal (47.3 L). Buy enough coolant for that amount and confirm the final level at the machine
What coolant is recommended for the John Deere 6250R?
The listed coolant type for the John Deere 6250R is John Deere Cool-Gard II. Match that coolant chemistry before topping up or flushing the system
Should I use premixed coolant in the John Deere 6250R?
The John Deere 6250R uses The recommended coolant for the John Deere 6250R tractor is John Deere Cool-Gard II where that mix is specified. Confirm the mix against your climate and manual
Can the John Deere 6250R coolant level drop after refilling?
Do not judge the job only by pouring in 12.49 gal (47.3 L). The final check is the actual radiator or overflow level after the system has burped air
Should I flush the John Deere 6250R cooling system or just top it up?
Topping up is fine for a small low-level correction. If the coolant is old, rusty, oily, diluted or the wrong type, drain and flush the system using the 12.49 gal (47.3 L) capacity as the refill guide
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
