John Deere 6130R Coolant Capacity

Quick answer:

The listed coolant capacity for the John Deere 6130R is 9.51 gal (36 L). Coolant type guidance points to John Deere Cool-Gard II.

Coolant capacity9.51 gal (36 L)Cooling system refill amount
Coolant typeJohn Deere Cool-Gard IIMatch coolant chemistry

John Deere 6130R Coolant Capacity Specs

Coolant capacity 9.51 gal (36 L)
Coolant type John Deere Cool-Gard II
Engine horsepower 130 hp
Engine displacement 276 cu in (4.52 L)

John Deere 6130R Coolant Capacity Guide

Coolant capacity guide

This model

9.51 gal

Class low

6 gal

Class typical

9.5 gal

Class high

14 gal

Compared with a broad 6 series guide, not the full tractor dataset.

John Deere 6130R Coolant Service Notes

Coolant capacity note The main coolant number for the John Deere 6130R is 9.51 gal (36 L). Use it as the cooling-system refill amount, then check the radiator or overflow level after the engine has warmed up and cooled down
Coolant service note For a full coolant service on the John Deere 6130R, plan around 9.51 gal (36 L) and match the listed coolant guidance: John Deere Cool-Gard II
Coolant type note The John Deere 6130R coolant type is John Deere Cool-Gard II. Wrong coolant chemistry can reduce corrosion, freeze and boil protection
Refill check After a drain and refill on the John Deere 6130R, the cooling system can burp air. Recheck the level after the first warm-up and cool-down cycle
Engine context The engine context for the John Deere 6130R is engine horsepower 130 hp and engine displacement 276 cu in (4.52 L). Use this for comparison only; the refill amount is the coolant capacity above

John Deere 6130R Coolant Capacity FAQ

What is the full coolant refill capacity for the John Deere 6130R?

Plan around 9.51 gal (36 L) when servicing coolant on the John Deere 6130R. Recheck the system when cool because air pockets can lower the level

What coolant should I put in the John Deere 6130R?

Coolant type for the John Deere 6130R is listed as John Deere Cool-Gard II. If the system has been filled with something else before, confirm compatibility before mixing

Should the John Deere 6130R coolant be checked hot or cold?

Yes. Use the 9.51 gal (36 L) figure as the refill guide, but always recheck level after warm-up and cool-down because trapped air can move through the system

What signs mean the John Deere 6130R coolant should be flushed?

If the John Deere 6130R coolant is only slightly low and otherwise clean, topping up with compatible coolant can be enough. If condition is poor, drain and refill instead

Does coolant color matter for the John Deere 6130R?

Match coolant by specification, not just color. For the John Deere 6130R, the listed coolant guidance is John Deere Cool-Gard II. If compatibility is unclear, flush and refill rather than mixing types

Official information note

Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.