John Deere 6130M Coolant Capacity

Quick answer:

The listed coolant capacity for the John Deere 6130M is 5.83 gal (22.1 L). Keep a little extra coolant available for final top-up after air leaves the system.

Coolant capacity5.83 gal (22.1 L)Cooling system refill amount

John Deere 6130M Coolant Capacity Specs

Coolant capacity 5.83 gal (22.1 L)
Engine horsepower 130 hp
Engine displacement 4.5 L (274.6 cu in)

John Deere 6130M Coolant Capacity Guide

Coolant capacity guide

This model

5.83 gal

Class low

6 gal

Class typical

9.5 gal

Class high

14 gal

Compared with a broad 6 series guide, not the full tractor dataset.

John Deere 6130M Coolant Service Notes

Coolant capacity note The main coolant number for the John Deere 6130M is 5.83 gal (22.1 L). Use it as the cooling-system refill amount, then check the radiator or overflow level after the engine has warmed up and cooled down
Coolant service note After refilling the John Deere 6130M, run it to operating temperature and recheck after cool-down. Air pockets can make the level drop
Refill check For the John Deere 6130M, 5.83 gal (22.1 L) is the planned refill amount. The final level may need a small top-up after trapped air leaves the system
Engine context For comparison, the John Deere 6130M engine details listed here are engine horsepower 130 hp and engine displacement 4.5 L (274.6 cu in). The coolant capacity remains the service number to use for refilling

John Deere 6130M Coolant Capacity FAQ

How many gallons of coolant does the John Deere 6130M hold?

For coolant service, the John Deere 6130M is listed at 5.83 gal (22.1 L). Buy enough coolant for that amount and confirm the final level at the machine

Why does coolant level drop after changing coolant in the John Deere 6130M?

Do not judge the job only by pouring in 5.83 gal (22.1 L). The final check is the actual radiator or overflow level after the system has burped air

Is topping up enough for the John Deere 6130M cooling system?

Topping up is fine for a small low-level correction. If the coolant is old, rusty, oily, diluted or the wrong type, drain and flush the system using the 5.83 gal (22.1 L) capacity as the refill guide

Official information note

Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.