The John Deere 5410 takes 2.62 gal (9.9 L) of coolant. Use coolant compatible with John Deere Cool-Gard II and follow the listed The recommended coolant for the John Deere 5410 tractor is John Deere Cool-Gard II, which guidance.
Coolant capacity2.62 gal (9.9 L)Cooling system refill amount
Antifreeze mixThe recommended coolant for the John Deere 5410 tractor is John Deere Cool-Gard II, whichFreeze/boil protection
John Deere 5410 Coolant Capacity Specs
Coolant capacity
2.62 gal (9.9 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
The recommended coolant for the John Deere 5410 tractor is John Deere Cool-Gard II, which
Engine horsepower
81 hp
Engine displacement
274.6 cu in (4.5 L)
John Deere 5410 Coolant Capacity Guide
Coolant capacity guide
This model
2.62 gal
Class low
4 gal
Class typical
6.5 gal
Class high
10 gal
Compared with a broad utility tractor guide, not the full tractor dataset.
John Deere 5410 Coolant Service Notes
Coolant capacity note
The useful service number here is 2.62 gal (9.9 L). Keep some extra coolant available because trapped air can lower the level after the first warm-up
Coolant service note
The John Deere 5410 cooling system should be refilled close to 2.62 gal (9.9 L), with coolant choice guided by John Deere Cool-Gard II and The recommended coolant for the John Deere 5410 tractor is John Deere Cool-Gard II, which
Coolant type note
Coolant type matters on the John Deere 5410. The listed type is John Deere Cool-Gard II, so avoid mixing random antifreeze unless compatibility is clear
Antifreeze mix note
For the John Deere 5410, the antifreeze mix is listed as The recommended coolant for the John Deere 5410 tractor is John Deere Cool-Gard II, which. Use the correct mix rather than topping up repeatedly with plain water
Refill check
Use the 2.62 gal (9.9 L) capacity to buy enough coolant for the John Deere 5410, but finish the job by checking the actual level marks
Engine context
The John Deere 5410 engine specs listed with this page are engine horsepower 81 hp and engine displacement 274.6 cu in (4.5 L). They help identify the machine, but they are not a substitute for the coolant capacity
John Deere 5410 Coolant Capacity FAQ
How much coolant should I buy for the John Deere 5410?
Use 2.62 gal (9.9 L) as the coolant-change amount for the John Deere 5410. The final level should still be checked at the radiator or overflow bottle
Is John Deere Cool-Gard II listed for the John Deere 5410?
Use coolant compatible with John Deere Cool-Gard II for the John Deere 5410. Capacity tells you how much; coolant type tells you what to use
What antifreeze ratio is listed for the John Deere 5410?
The John Deere 5410 antifreeze guidance is The recommended coolant for the John Deere 5410 tractor is John Deere Cool-Gard II, which. Check the coolant label before mixing concentrate and water
Do I fill the John Deere 5410 exactly to capacity or check the level marks?
The 2.62 gal (9.9 L) number helps you plan the refill. The actual finish point is the correct level mark after warm-up, cool-down and leak checking
Can I just add coolant to the John Deere 5410 if the level is low?
For the John Deere 5410, use the 2.62 gal (9.9 L) capacity when planning a full drain or flush. Topping up only solves low level, not worn-out coolant
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
