Coolant capacity for the John Deere 5200 is 2.5 gal (9.5 L). The coolant type is listed as John Deere Cool-Gard II, and the antifreeze mix is 40/60 coolant and water mix.
Coolant capacity2.5 gal (9.5 L)Cooling system refill amount
Antifreeze mix40/60 coolant and water mixFreeze/boil protection
John Deere 5200 Coolant Capacity Specs
Coolant capacity
2.5 gal (9.5 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
40/60 coolant and water mix
Engine horsepower
45.6 hp
Engine displacement
179 cu in (2.93 L)
John Deere 5200 Coolant Capacity Guide
Coolant capacity guide
This model
2.5 gal
Class low
4 gal
Class typical
6.5 gal
Class high
10 gal
Compared with a broad utility tractor guide, not the full tractor dataset.
John Deere 5200 Coolant Service Notes
Coolant capacity note
The main coolant number for the John Deere 5200 is 2.5 gal (9.5 L). Use it as the cooling-system refill amount, then check the radiator or overflow level after the engine has warmed up and cooled down
Coolant service note
A proper coolant change on the John Deere 5200 means using the 2.5 gal (9.5 L) capacity and keeping the coolant chemistry consistent with John Deere Cool-Gard II and 40/60 coolant and water mix
Coolant type note
For the John Deere 5200, coolant choice is listed as John Deere Cool-Gard II. Capacity tells you how much; coolant type tells you what to use
Antifreeze mix note
The John Deere 5200 coolant mix guidance is 40/60 coolant and water mix. This matters most in freezing weather, hot work and long service intervals
Refill check
For the John Deere 5200, 2.5 gal (9.5 L) is the planned refill amount. The final level may need a small top-up after trapped air leaves the system
Engine context
The John Deere 5200 engine specs listed with this page are engine horsepower 45.6 hp and engine displacement 179 cu in (2.93 L). They help identify the machine, but they are not a substitute for the coolant capacity
John Deere 5200 Coolant Capacity FAQ
How many gallons of coolant does the John Deere 5200 hold?
For coolant service, the John Deere 5200 is listed at 2.5 gal (9.5 L). Buy enough coolant for that amount and confirm the final level at the machine
What antifreeze coolant type is listed for the John Deere 5200?
The listed coolant type for the John Deere 5200 is John Deere Cool-Gard II. Match that coolant chemistry before topping up or flushing the system
Should I use premixed coolant in the John Deere 5200?
The John Deere 5200 coolant mix guidance is 40/60 coolant and water mix. Keep the mix consistent when topping up so freeze and boil protection stay in range
Why does coolant level drop after changing coolant in the John Deere 5200?
Do not judge the job only by pouring in 2.5 gal (9.5 L). The final check is the actual radiator or overflow level after the system has burped air
Is topping up enough for the John Deere 5200 cooling system?
Topping up is fine for a small low-level correction. If the coolant is old, rusty, oily, diluted or the wrong type, drain and flush the system using the 2.5 gal (9.5 L) capacity as the refill guide
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
