Coolant capacity for the John Deere 5085E is 25 gal (94.6 L). The coolant type is listed as John Deere Cool-Gard II, and the antifreeze mix is 50/50 coolant and water mix.
John Deere 5085E Coolant Capacity Specs
| Coolant capacity | 25 gal (94.6 L) |
|---|---|
| Coolant type | John Deere Cool-Gard II |
| Antifreeze mix | 50/50 coolant and water mix |
| Engine horsepower | 85 hp |
| Engine displacement | 276 cu in (4.52 L) |
John Deere 5085E Coolant Capacity Guide
Coolant capacity guide
Compared with a broad utility tractor guide, not the full tractor dataset.
John Deere 5085E Coolant Service Notes
| Coolant capacity note | The main coolant number for the John Deere 5085E is 25 gal (94.6 L). Use it as the cooling-system refill amount, then check the radiator or overflow level after the engine has warmed up and cooled down |
|---|---|
| Coolant service note | A proper coolant change on the John Deere 5085E means using the 25 gal (94.6 L) capacity and keeping the coolant chemistry consistent with John Deere Cool-Gard II and 50/50 coolant and water mix |
| Coolant type note | For the John Deere 5085E, coolant choice is listed as John Deere Cool-Gard II. Capacity tells you how much; coolant type tells you what to use |
| Antifreeze mix note | The John Deere 5085E coolant mix guidance is 50/50 coolant and water mix. This matters most in freezing weather, hot work and long service intervals |
| Refill check | For the John Deere 5085E, 25 gal (94.6 L) is the planned refill amount. The final level may need a small top-up after trapped air leaves the system |
| Engine context | For comparison, the John Deere 5085E engine details listed here are engine horsepower 85 hp and engine displacement 276 cu in (4.52 L). The coolant capacity remains the service number to use for refilling |
John Deere 5085E Coolant Capacity FAQ
How many gallons of coolant does the John Deere 5085E hold?
For coolant service, the John Deere 5085E is listed at 25 gal (94.6 L). Buy enough coolant for that amount and confirm the final level at the machine
What antifreeze coolant type is listed for the John Deere 5085E?
The listed coolant type for the John Deere 5085E is John Deere Cool-Gard II. Match that coolant chemistry before topping up or flushing the system
Should I use premixed coolant in the John Deere 5085E?
The John Deere 5085E antifreeze guidance is 50/50 coolant and water mix. Check the coolant label before mixing concentrate and water
Why does coolant level drop after changing coolant in the John Deere 5085E?
Do not judge the job only by pouring in 25 gal (94.6 L). The final check is the actual radiator or overflow level after the system has burped air
Is topping up enough for the John Deere 5085E cooling system?
Topping up is fine for a small low-level correction. If the coolant is old, rusty, oily, diluted or the wrong type, drain and flush the system using the 25 gal (94.6 L) capacity as the refill guide
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
