For the John Deere 3025D, coolant capacity is 1.31 gal (5 L). Fill slowly and recheck the radiator or overflow level after the first heat cycle.
John Deere 3025D Coolant Capacity Specs
| Coolant capacity | 1.31 gal (5 L) |
|---|---|
| Engine horsepower | 24.4 hp |
| Engine displacement | 1.6 L (97.6 cu in) |
John Deere 3025D Coolant Capacity Guide
Coolant capacity guide
Compared with a broad compact tractor guide, not the full tractor dataset.
John Deere 3025D Coolant Service Notes
| Coolant capacity note | For the John Deere 3025D, the coolant capacity is 1.31 gal (5 L). That is the buying and refill guide for a full cooling-system service |
|---|---|
| Coolant service note | Use 1.31 gal (5 L) as the refill guide for the John Deere 3025D. The final level should still be confirmed at the radiator or overflow bottle |
| Refill check | Use the 1.31 gal (5 L) capacity to buy enough coolant for the John Deere 3025D, but finish the job by checking the actual level marks |
| Engine context | For comparison, the John Deere 3025D engine details listed here are engine horsepower 24.4 hp and engine displacement 1.6 L (97.6 cu in). The coolant capacity remains the service number to use for refilling |
John Deere 3025D Coolant Capacity FAQ
How many litres of coolant does the John Deere 3025D take?
The John Deere 3025D takes 1.31 gal (5 L) of coolant. Final level can settle after trapped air leaves the cooling system
How do I avoid air pockets when refilling the John Deere 3025D coolant?
After a coolant change on the John Deere 3025D, check for leaks, watch temperature and recheck the level once the engine cools down
Should old coolant be drained from the John Deere 3025D?
Low level, bad smell, rust, sludge, oil film or overheating are signs to inspect the John Deere 3025D cooling system rather than only topping it up
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.






