John Deere 630 Coolant Capacity

Quick answer:

Coolant capacity for the John Deere 630 is 6.5 gal (24.6 L). This is the main refill figure for a drain, flush or coolant change.

Coolant capacity6.5 gal (24.6 L)Cooling system refill amount

John Deere 630 Coolant Capacity Specs

Coolant capacity 6.5 gal (24.6 L)
Engine model John Deere 5.0L 2-cyli

John Deere 630 Coolant Capacity Guide

Coolant capacity guide

This model

6.5 gal

Class low

0.8 gal

Class typical

2.5 gal

Class high

5 gal

Compared with a broad older small tractor guide, not the full tractor dataset.

John Deere 630 Coolant Service Notes

Coolant capacity note The John Deere 630 coolant capacity is 6.5 gal (24.6 L). Treat it as a cooling-system amount, not a radiator-only top-up amount
Coolant service note For a full coolant service on the John Deere 630, plan around 6.5 gal (24.6 L), refill slowly, run the engine, let it cool and recheck the level
Refill check When refilling the John Deere 630, do not pour in 6.5 gal (24.6 L) and walk away. Fill slowly, run the engine, let it cool and recheck the level
Engine context For comparison, the John Deere 630 engine details listed here are engine model John Deere 5.0L 2-cyli. The coolant capacity remains the service number to use for refilling

John Deere 630 Coolant Capacity FAQ

What coolant amount is listed for the John Deere 630?

A full coolant refill on the John Deere 630 is listed at 6.5 gal (24.6 L). Fill slowly and allow for a small top-up after the first heat cycle

What is the final check after a John Deere 630 coolant change?

Check the John Deere 630 coolant level cold after service. Hot coolant is pressurized and dangerous, so let the system cool before opening the cap

Should I drain and refill the John Deere 630 coolant system?

If coolant condition is good, topping up may be enough. If it is old or contaminated, a full drain and refill is safer for the John Deere 630

Official information note

Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.